Atec Ideal-LANTEK7 - Manual (Page 2)

The LANTEK 7 display unit comes with the brightest 1/4 VGA color screen in
the industry. The remote unit has a two-line black and white LCD display to
enhance communications, and can initiate an AutoTest to increase productivity
in one-person operations. Both units have an overmolded edge to function in
the harshest environments.
Along with serial and USB ports, LANTEK 7 comes standard with two full-function
PCMCIA slots to accept compact flash memory and provide for future capabilities.
This allows for virtually unlimited test storage with graphs keeping your unit in
the field. LANTEK 7 comes with LANTEK Reporter PC software that can upload
stored tests from the serial or USB ports, or compact flash memory and can
create brief, summary, or detailed certification reports for your clients.
Don’t limit yourself to Category 6/ISO E. LANTEK 7 allows you to certify the
most advanced installations.
LANTEK ® 7 LAN Cable Certifier
IDEAL INDUSTRIES, INC.
9145 Balboa Av., San Diego, CA 92123 U.S.A.
Tel: (858) 279-2955
Fax: (858) 278-5141
Becker Place, Sycamore, IL 60178 U.S.A.
Toll-Free: (800) 435-0705 in U.S.A.
Becker Place: (815) 895-5181
Ajax, Ontario, L1S 2E1, Canada.
Toll-Free: (800) 527-9105 in Canada.
Canada: (905) 683-3400
IDEAL INDUSTRIES (U.K.) LTD.
225 Europa Boulevard, Gemini Business Park, Warrington
Cheshire WA5 7TN, England
Tel: 44-1925-444446
Fax: +44-1925-445501
IDEAL INDUSTRIES GmbH.
Gutenbergstrasse 10, 85737 Ismaning, Germany.
Tel: +49-89-99686-0
Fax: +49-89-99686-111
www.idealindustries.com
LANTEK 7 Range Resolution Accuracy
Length (50-100 Ω cable) 0 - 2000 ft 1 ft. ±(3% + 3 ft.)
Delay 0 – 8000 ns 1 ns ±(3% + 1 ns)
Average Impedance 35 – 180 Ω 0.1 Ω ±(3% + 1 Ω )
Capacitance (Bulk) 0 – 100 nF 1 pF or 3 dig ±(2% + 20 pF)
Capacitance 0 – 100 pF/ft. 0.1 pF ±(2% + 1 pF)
DC Loop Resistance 0 – 200 Ω 0.1 Ω ±(1% + 2 Ω )
Attenuation 1-750 MHz 0.1 dB Level III*
NEXT 1-750 MHz 0.1 dB Level III*
Return Loss 1-750 MHz 0.1 dB Level III*
ELFEXT 1-750 MHz 0.1 dB Level III*
Noise Floor < -90 dB
Dynamic Range > 90 dB
Autotest Storage Capacity (Internal Memory)*
No Graphics Up to 6,000 Tests
With Graphics Up to 100 Tests
Autotest Storage Capacity (External 32 MB Flash)*
No Graphics Up to 24,000 Tests
With Graphics Up to 400 Tests with 32 MB
* Depending on Autotest Categories Up to 3,200 Tests with 256 MB
Autotest time (250 MHz) Approx. 25 seconds
Autotest time (600 MHz) Approx. 35 seconds
Standard Test Compliance ANSI/TIA/EIA 568B, Category 6 (Draft), ISO C/D
and ISO E/F (draft), AS/NZS 3080, IEEE 802.3
Ethernet, EN50173, EN50173.A1
Cable Types UTP/ScTP/FTP
CAT 3/5e/6/7; ISO C/D/E/F (Channel, Basic, and
Permanent Link)
IBM STP Type 1,2,6, Coax
Dimensions 10.1” x 5.0” x 2.3” Display & Remote
256mm x 127mm x 58mm Display & Remote
Weight 2.3 lb (1050g) – Display
2.0 lb (914g) – Remote
1.2 lb (548g) - Battery
Battery Packs NiMH (rechargeable)
Typical Operating Life (Battery) 8 hrs
Max. Operating Temp. 0 ° C – 50 ° C
Max. Storage Temp. - 20 ° C to + 70 ° C
Humidity 5-90 % noncondensing Form No. P-2218
© 2001 IDEAL INDUSTRIES, INC. 12/01
PRINTED IN U.S.A.
* Level III only specified to 250 MHz
LANTEK 7 comes standard with all the items necessary to
certify your job and create certification reports:
Field calibration does not require a special adapter. It is
accomplished through connecting a patch cord between
the channel adapters.
LANTEK 7 LANTEK 7P
Soft Carry Case ✔
Display unit with battery ✔ ✔
Remote unit with battery ✔ ✔
LANTEK Reporter Software ✔ ✔
Serial and USB cables ✔ ✔
Two AC wall adapters ✔ ✔
Two talksets ✔ ✔
User manual ✔ ✔
Quick Start Guide ✔ ✔
Registration Card ✔ ✔
Included are the following
adapters and Patch cords:
Two Category 7 channel adapters ✔ ✔
Two Category 7 Reference
Patch cords
✔ ✔
Two Category 7 to Category
6 Reference Patch cords
✔ ✔
Premium Package:
Hard carry case
✔
PCMCIA adapter ✔
32 MB compact flash ✔
USB port flash reader for PC ✔
Offline battery charger ✔
LANTEK 7 Data.11/01 12/17/01 1:25 PM Page 2