beautypg.com

Atec Ideal-LANTEK7 User Manual

Lantek, 7 lan cable certifier

background image

LANTEK

®

7 LAN Cable Certifier

Certifying these higher

performance systems has

required a combination of

cable testers and network

analyzers. Now you can certify

these systems up to 750 MHz

with LANTEK 7, simplifying the task

while reducing costs.

First cable tester fully
compliant with emerging
Category 7/ISO F standards,
with a frequency range up
to 750 MHz

Full Category 7/ISO F
AutoTest, with graphs in
approximately 35 seconds

Advanced link adapter
method provides more
versatility and reduces cost
of ownership

Built in TDR ready for
copper and fiber

First fiber accessory for a
copper tester that traces
fiber runs, displays distance
to and magnitude of events

Display unit comes with
1/4 VGA color screen,
remote unit comes with
two-line black and white
LCD display

Serial and USB ports for
uploading tests and
upgrading firmware

Two full-function PCMCIA

slots accept compact

flash memory and

provide for future

capabilities

LANTEK 7 is the first LAN cable tester capable
of certifying installations up to 750 MHz,
exceeding draft Category 7/ISO F specifica-
tions. Certifying these installations has
required a combination of cable testers and
network analyzers. Now you can certify these
systems up to 750 MHz simplifying the task
while reducing costs.

LANTEK 7 utilizes an advanced link adapter
method to reduce cost of ownership.
LANTEK 7 comes with a pair of Category 7/
ISO F channel adapters. These channel
adapters fit into the case of the unit and are
locked in place. This creates a stable and
repeatable testing platform while eliminating
bulky adapters extending beyond the end of
the unit. By simply plugging in a Category 7/
ISO F reference patch cord to the channel
adapter, you can now perform Category 7/ISO F
permanent link testing. Should the plug ever
wear out the patch cord is replaced rather
than the entire assembly reducing lifetime
cost of ownership.

Among the LANTEK 7 accessories are the
the industry’s most advanced fiber options,
FIBERTEK and TRACETEK. FIBERTEK
enables loss, length, bi-directional testing
over two fibers, and talkset over fiber capa-
bilities for 850 and 1300 nm Multimode and
1310 and 1550 nm Singlemode fiber.

TRACETEK is the first fiber accessory
for a copper tester that will trace
a fiber run, locate distance to
events along the fiber, and
measure the magnitude
of the event. This capa-
bility can eliminate the
need for a more costly
OTDR in campus
network environments.

LANTEK 7 Data.11/01 12/17/01 1:25 PM Page 1