Atec Fluke-Certifiber - Manual (Page 2)

Standards:
Allows combined OLTS Tier 1 (basic), OTDR Tier 2 (extended) certification, end-face inspection and
reporting when paired with OptiFiber™ Pro OTDR
Set reference wizard verifies test reference cords (TRCs) per ISO/IEC 14763-3 and eliminates
negative loss errors
Encircled Flux compliant optical launch conditions required by ANSI/TIA and ISO/IEC standards for
testing multimode fiber
Detailed View of Fiber Loss Results
View the results of each fiber tested at the same time and the Pass/Fail status on the test results screen.
Easily identify the fiber type, test limits, loss and which fiber correlates to each result. All good results are
highlighted with a green icon, any faulty events are highlighted with red icons and fibers are identified as
output or input to facilitate quick identification and corrective action. The Taptive user interface also makes the
results screen a powerful tool with a detailed window which can be touched to drill down and see detailed
results.
The screen below shows margin and limit values in the window. Simply tap the screen to drill into specific
results as shown in second image.
Complete data is displayed with a test
result. The dotted line shows what's
included in the measurement. Detail
windows show the results for each
fiber tested.
Detail shows margin and allowable
limits for the fiber at two wavelengths.
2 of 8