Atec Exfo-PPM-350B-EG - Manual (Page 2)

PPM-350B
PON Power Meter
www.EXFO.com
A Revolutionary Testing Tool for FTTH
and FTTP Systems
The industry’s first PON-specific power meter, the
PPM-350B is the flagship of EXFO’s line of test
instruments specifically intended for FTTH and FTTP
systems. The PPM-352B-EG-ER is the ideal tool for
FTTH/FTTP service activation and troubleshooting.
Service Activation Testing
Optimizing network reliability requires that all PON
signals be measured all the way through service
activation to ensure they meet established standards.
The PPM-350B offers the features to address this need:
Pass-through connection for ONT signal
measurement and simultaneous measurement
of all PON signals
Filtered detectors for individual measurement
of each wavelength
Upstream burst detection at 1310 nm
Troubleshooting Testing
Throughout the maintenance phase, various
transmission problems—fiber cuts, damaged/dirty
connectors, macrobendings, optical transmitter failure,
etc.—may ultimately cause signal loss or degradation.
Benefit from the PPM-350B’s troubleshooting
functionalities:
Quick, on-site test and measurement of PON
signals, anywhere on the network
Fault identification and isolation
Upstream signal
from the ONT Downstream signal
from the OLT
The PPM-352B-EG-ER
The PPM-350B’s threshold configuration software interface.
The PPM-350B is a choice solution for service activation and maintenance of all PON architectures within a network.