Atec JDSU-JD725A - Manual (Page 8)

Test & Measurement Regional Sales
NORTH AMERICA
TEL: 1 866 228 3762
FAX: +1 301 353 9216
LATIN AMERICA
TEL: +1 954 688-5660
FAX: +1 954 3454668
ASIA PACIFIC
TEL:+852 2892 0990
FAX:+852 2892 0770
EMEA
TEL:+49 7121 86 2222
FAX:+49 7121 86 1222
www.jdsu.com/test
Product specifications and descriptions in this document subject to change without notice. © 2009 JDS Uniphase Corporation 30149482.002.0609.JD726A.DS.CPO.TM.AE
JD725A CABLE AND ANTENNA ANALYZER
JD72450552
Sensor type Peak
Frequency range 40 MHz ~ 4000 MHz
Power range ~40 dBm ~ 0 dBm (0.1 µW ~ 1 mW)
Measurement uncertainty ± 10% of reading 2,3
Connector type N-male
Miscellaneous
Dimension 260 x 190 x 60 mm (10.2” x 7.5” x 2.4”)
Weight < 2.1 kg (4.62 lbs)
Battery Li-ion (>3hrs continuous operating)
Operating temperature -10 ~ 50 °C (14 ~ 122 °F)
Storage temperature -40 ~ 80 °C (-40 ~ 176 °F)
Humidity 95% no condensation
1) Measurement speed provided at one-port measurements.
2)The specification provided at a temperature of 25°C ± 10°C.
3) CW condition
*All Specifications based on calibrating at 25°C after 5 minute warm-up.
Ordering Information
Mainframe
JD725A Cable and Antenna Analyzer - Dual Port,
25 MHz ~ 4000 MHz
Optional
JD725A001 Bias Tee
Standard Accessories
Soft carring case
AC-DC adapter
Cross LAN cable (1.5 m)
1 GB USB memory
Automotive Cigarette Lighter/12V DC Adapter
Lithium-Ion battery
Stylus pen
User's manual and application software on CD
2 years warranty
Optional Accessories
JD72550507 Dual Port Calibration Kit (N), 40 dB 4 GHz
Open-Short-Load, 40 dB, 4 GHz •
Load, 40 dB, 4 GHz •
Two adapters N(f) to N(f), DC to 4 GHz, 50 Ω •
Two RF test cables (1 m), N(m) to N(m) •
GC72450531 RF cable, 1.5 m N(m)-N(f)
GC72450532 RF cable, 3.0 m N(m)-N(f)
JD72350542 Hard case
JD72550562 JD725A User's Manual - printed version
G710050571 Adapter N(m) to DIN(f), DC to 4 GHz, 50 Ω
G710050572 Adapter DIN(m) to DIN(m), DC to 4 GHz, 50 Ω
G710050573 Adapter N(m) to SMA(f), DC to 18 GHz, 50 Ω
G710050574 Adapter N(m) to BNC(f), DC to 1.5 GHz, 50 Ω
G710050581 Attenuator 40 dB, 100 W DC to 4 GHz (unidirectional)
GC7256000 JD725A Warranty extension of 1 year for Asia, North
America
GC7256001 JD725A Warranty extension of 1 year for Latin
America, EMEA
Power Meter Accessories
JD731A Directional power sensor, 300 ~ 3800 MHz,
Average 0.15 ~ 150 W, Peak 4 ~ 400W
JD733A Directional power sensor, 150 ~ 3500 MHz,
Average/Peak 0.25 ~ 20 W
JD732A Terminating average power sensor
20 MHz~ 3800 MHz, -30 ~ +20 dBm
JD734A Terminating peak power sensor,
20 ~ 3800 MHz, -30 ~ +20 dBm
JD736A Terminating average and peak power sensor,
20 ~ 3800 MHz, -30 ~ +20 dBm
JD72450551 Terminating average power sensor, 40 ~ 3000 MHz,
-30 ~ 0 dBm
JD72450552 Terminating peak power sensor, 40 ~ 4000 MHz,
-40 ~ 0 dBm
G710050581 Attenuator 40 dB, 100 W, DC to 4 GHz (unidirectional)