Atec JDSU-JD748A User Manual

Jd748a, Celladvisor™ signal analyzer

WEBSITE:

www.jdsu.com/test

COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS

JD748A

CellAdvisor™ Signal Analyzer

Spectrum Analyzer: 100 kHz to 4 GHz

Power Meter: 10 MHz to 4 GHz

Specification Conditions

The JD748A specifications apply under these conditions:
• The instrument has been turned on for at least 15 minutes

• The instrument is operating within a valid calibration period

• Data with no tolerance are considered typical values

• Cable and antenna measurements apply after calibration to the OSL standard

• Typical and nominal values are defined as:

–

Typical: expected performance of the instrument operating under 20° to 30°C

after being at this temperature for 15 minutes

–

Nominal: a general, descriptive term or parameter