Atec JDSU-JD785A - Manual (Page 7)

7
JD785A CELLADVISOR BASE STATION ANALYZER
cdmaOne/cdma2000® Signal Analyzer (Option 020)
General Parameters
Frequency range Band 0 to 10
Input signal level –40 to +25 dBm
RF channel power accuracy ±1.0 dB (typical)
CDMA compatibility cdmaOne and cdma2000
Frequency error ±10 Hz + ref freq accuracy 99% confidence level
Rho accuracy ±0.005 0.9 < Rho < 1.0
Residual Rho >0.995 (typical)
PN offset 1 x 64 chips
Code domain power ±0.5 dB relative power
±1.5 dB absolute power Code channel power >–25 dB
Code channel power >–25 dB
Pilot power accuracy ±1.0 dB (typical)
Time offset ±1.0 μs, ±0.5 μs (typical) External trigger
Measurements
Option 020 Option 040
Channel power Constellation Auto measure Channel scanner (up to 6)
Channel power Pilot power Channel power Frequencies or channels
Spectral density Rho Occupied bandwidth Channel power, PN offset
Peak to average power EVM Spectrum emission mask Pilot power, Ec/Io
Occupied bandwidth Frequency error ACPR PN scanner (up to 6)
Occupied bandwidth Time offset Multi-ACPR Channel power
Integrated power Carrier feed-through Rho Pilot dominance
Occupied power PN offset Frequency error PN offset
Spectrum emission mask Code domain power Time offset Ec/Io, pilot power, delay
Reference power Abs/Rel code power Carrier feed-through Multipath profile
Peak level at defined range Channel power Pilot power Channel power
ACPR Power bar graph (Abs/Rel) Max inactive power Multipath power
Reference power Pilot, Paging, Sync, Q-Paging PN offset Ec/Io, delay
Abs power at defined range Max, avg active power Power statistics CCDF Code domain power
Rel power at defined range Max, avg inactive power Abs/Rel code power
Multi-ACPR PN offset Channel power
Lowest reference power Codogram PN offset
Highest reference power Code utilization Pilot, Paging, Sync, Q-Paging power
Abs power at defined range RCSI Max, avg active power
Rel power at defined range Pilot, Paging, Sync, Q-Paging Max, avg inactive power
Spurious emissions CDP table Frequency error
Peak freq at defined range Reference power Time offset, Rho, EVM
Peak level at defined range Code utilization Carrier feed-through
Code, spreading factor Amplifier capacity
Allocation (channel type) Peak amplifier capacity
Relative, absolute power Average amplifier capacity
Code utilization
Peak utilization
Average utilization
Route map
Pilot power
Ec/Io
Longitude, latitude, and satellite in all screens