Atec JDSU-JD785A - Manual (Page 14)

14
JD785A CELLADVISOR BASE STATION ANALYZER
General Information
Inputs and Outputs
RF in Spectrum analyzer
Connector
Impedance
Damage level Type-N, female
50 Ω (nominal)
>+33 dBm, ±50 VDC (nominal), 3 min
Reflection/RF out Cable and antenna analyzer
Connector
Impedance
Damage level Type-N, female
50 Ω (nominal)
>+40 dBm, ±50 VDC (nominal), 3 min
RF in Cable and antenna analyzer
Connector
Impedance
Maximum level Type-N, female
50 Ω (nominal)
>+25 dBm, ±50 VDC (nominal)
External trigger, GPS
Connector
Impedance
SMA, female
50 Ω (nominal)
External ref
Connector
Impedance
Input frequency
Input range
SMA, female
50 Ω (nominal)
10 MHz, 13 MHz, 15 MHz
–5 to +5 dBm
USB
USB host
1
USB client 2
Type A, 1 port
Type B, 1 port
LAN RJ45, 10/100Base-T
E1/T1 RJ45
Audio jack 3.5 mm headphone jack
External power 5.5 mm barrel connector
Speaker Built-in speaker
Display
Type Resistive touch screen
Size 8 inch, LED backlight, transflective LCD
with anti-glare coating
Resolution 800 x 600
Power
External DC input 12 to 19 VDC
Power consumption 37 W 49 W maximum
(when charging battery)
Battery
Type 10.8 V, 7800 mA/hr (Lithium ion)
Operating time >3 hours (typical)
Charge time 2.5 hours (80%), 5 hours (100%)
Charging temperature 0° to 45°C (32° to 104°F) ≤85% RH
Discharging temperature –20° to 55°C (4° to 131°F) ≤85% RH
Storage temperature
3 0° to 25°C (32° to 77°F)
≤85% RH (non-condensing)
Data Storage
Internal 4 Maximum 100 MB
External 5 Limited by size of USB flash drive
Environmental
Operating temperature
AC Power
0° to 40°C (32° to 104°F) with no derating
Battery 0° to 40°C (32° to 104°F) @charging
–10° to 55°C (14° to 131°F) @discharging
Maximum humidity 85% RH (non-condensing)
Shock and vibration MIL-PRF-28800F Class 2
Storage temperature 6 –55° to 71°C (–67° to 160°F)
EMC
IEC/EN 61326-1:2006 (complies with European EMC)
CISPR11:2009 +A1:2010
ESD
IEC/EN 61000-4-2
Size and Weight (standard configuration)
Weight (with battery) <4.3 kg (9.5 lb)
Size (W x H x D) 295 x 195 x 82 mm
(11.6 x 7.7 x 3.2 in)
Warranty
2 years
Calibration Cycle
1 year
1. Connects flash drive and power sensor.
2. Connects to PC for data transfer.
3. 20 to 85% RH, store battery pack in low-humidity environment.
extended exposure to temperature above 45°C could significantly degrade battery
performance and life.
4. Up to 3800 traces.
5. Supports USB 2.0 compatible memory devices.
6. With the battery pack removed.