Atec JDSU-JD788A - Manual (Page 14)

14
JD788A CELLADVISOR SIGNAL ANALYZER
Optional RF Cables
G710050530 1.0 m (3.28 ft) RF cable, DC to 18 GHz, Type-N(m) to
Type-N(m), 50 Ω
G710050531 1.5 m (4.92 ft) RF cable, DC to 18 GHz, Type-N(m) to
Type-N(f), 50 Ω
G710050532 3.0 m (9.84 ft) RF cable, DC to 18 GHz, Type-N(m) to
Type-N(f), 50 Ω
G710050533 1.5 m (4.92 ft) RF cable, DC to 18 GHz, Type-N(m) to
SMA(m), 50 Ω
G710050534 1.5 m (4.92 ft) RF cable, DC to 18 GHz, Type-N(m) to
QMA(m), 50 Ω
G710050535 1.5 m (4.92 ft) RF cable, DC to 18 GHz, Type-N(m) to
SMB(m), 50 Ω
Optional Omni Antennas
G700050351 RF omni antenna Type-N(m), 400 MHz to 450 MHz
G700050352 RF omni antenna Type-N(m), 450 MHz to 500 MHz
G700050353 RF omni antenna Type-N(m), 806 MHz to 896 MHz
G700050354 RF omni antenna Type-N(m), 870 MHz to 960 MHz
G700050355 RF omni antenna Type-N(m), 1.71 GHz to 2.17 GHz
G700050356 RF omni antenna Type-N(m), 720 MHz to 800 MHz
G700050357 RF omni antenna Type-N(m), 2.3 GHz to 2.7 GHz
Optional Yagi Antennas
G700050364 RF Yagi antenna Type-N(f), 806 MHz to 896 MHz, 10.2 dBd
G700050365 RF Yagi antenna Type-N(f), 866 MHz to 960 MHz, 10.2 dBd
G700050363 RF Yagi antenna Type-N(f), 1.75 GHz to 2.39 GHz, 9.8 dBd
G700050366 RF Yagi antenna Type-SMA(f), 700 MHz to 4 GHz, 1.85 dBd
Optional RF Power Sensors
JD731B Directional Power Sensor (peak and average power)
Frequency: 300 MHz to 3.8 GHz
Power: average 0.15 to 150 W, peak 4 to 400 W
JD733A Directional Power Sensor (peak and average power)
Frequency: 150 MHz to 3.5 GHz
Power: average/peak 0.1 to 50 W
JD732B Terminating Power Sensor (average power)
Frequency: 20 MHz to 3.8 GHz
Power: –30 to +20 dBm
JD734B Terminating Power Sensor (peak power)
Frequency: 20 MHz to 3.8 GHz
Power: –30 to +20 dBm
JD736B Terminating Power Sensor (peak and average power)
Frequency: 20 MHz to 3.8 GHz
Power: –30 to +20 dBm
Standard
JD788A 9 kHz to 8 GHz spectrum analyzer
10 MHz to 8 GHz RF power meter (internal mode)
Options
NOTE: Upgrade options for the JD788A use the designation JD788AU
before the respective last three-digit option number.
JD788A001
2-port transmission measurement 1
JD788A003 CW signal generator
JD788A009 20 MHz demodulation hardware
JD788A010 GPS receiver and antenna
JD788A011 Interference Analyzer 2, 3
JD788A012 Channel Scanner
JD788A013 Optical Power Meter 4
JD788A020 cdmaOne/cdma2000 Signal Analyzer 5
JD788A021 EV-DO Signal Analyzer 6
JD788A022 GSM/GPRS/EDGE Signal Analyzer 5
JD788A023 WCDMA/HSPA+ Signal Analyzer 5
JD788A025 TD-SCDMA Signal Analyzer 5
JD788A026 Mobile WiMAX Signal Analyzer 5
JD788A028 LTE-FDD Signal Analyzer 5
JD788A029 LTE-TDD Signal Analyzer 5
JD788A040 cdmaOne/cdma2000 OTA Analyzer 3, 7
JD788A041 EV-DO OTA Analyzer 3, 7
JD788A042 GSM/GPRS/EDGE OTA Analyzer 3, 7
JD788A043 WCDMA/HSPA+ OTA Analyzer 3, 7
JD788A045 TD-SCDMA OTA Analyzer 3, 7
JD788A046 Mobile WiMAX OTA Analyzer 3, 7
JD788A048 LTE-FDD OTA Analyzer 3, 7
JD788A049 LTE-TDD OTA Analyzer 3, 7
Standard Accessories (can be purchased separately)
G710550326 AC/DC power adapter 8
G710550335 Cross LAN cable (1.5 m) 8
GC73050515 USB A to B cable (1.8 m) 8
GC72450518 >1 GB USB memory 8
G710550325 Rechargeable lithium ion battery 8
G710550323 Automotive cigarette lighter 12 VDC adapter 8
G710550316 Stylus pen 8
JD780A361 JD780A Series user’s manual and application
software — CD
1. Requires dual-port calibration kit.
2. Highly recommend adding JD788A010.
3. Highly recommend adding g70005035x and/or g70005036x.
4. Requires MP-60 or MP-80.
5. Requires Option 9.
6. Requires Options 9 and 20
7. Requires Options 9 and 10.
8. Standard accessories can be purchased separately.
Ordering Information