Atec Narda-NBM-520 - Manual (Page 2)

58 narda Safety Test Solutions an communications company USA • Germany • Italy
USA TEL: (1) 631 231-1700 • FAX: (1) 631 231-1711 • E-MAIL: [email protected] • www.narda-sts.us
Electric and Magnetic Field Measurement
NBM-520 LCD Display Description
Battery
Level
Probe
Model
Mode
Result
Unit
Type of
Field
Result
Status
Features
Easiest 4 button operation
Automatic probe type recognition
Intelligent probes (automatic probe data transfer)
Audible alarm function (threshold adjustable by PC software)
Auto-Zeroing (time interval adjustable by PC software)
Time Averaging (time adjustable by PC software)
Spatial Averaging (discrete samples or continuously)
Maximum Hold display function
Calibration Due Date check by PC software
LCD Backlight (adjustable illumination time by PC software)
Auto Power-Off (adjustable time by PC software)
Selectable unit (V/m, A/m, mW/cm 2 or W/m 2 , % for shaped probes)
Hold key to freeze the current display
Optical link to connect to a PC
Remote control via optical link
Interoperability with NBM-550 (NBM-550 controls NBM-520)
PC software included for instrument setup and remote testing
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
PC Software
The NBM-TS transfer software is used for:
changing instrument settings
controlling firmware updates
performing remote controlled measurements
−
−
−
NBM-520 Broadband Field Meter