Atec Beamex-mc5 - Manual (Page 4)

5
Multifunction Calibrator
Easy to use
The logical multilingual user interface makes MC5 very
easy to use. Calibration procedures for various instrument
types are provided as standard.
The user selects the instrument type via a menu list – MC5 is
then automatically configured for the calibration. Alternately,
the calibration procedure for specific instruments can be
downloaded from the QCAL
® System software (QM6 Quality
Manager or QD3 Quality Documenter).
The large back-lit LCD display gives both as-found and as-left
calibration results both in numerical and graphical form.
If needed, on-line help is available via a single key stroke.
Additional features
• HART ® communication using an internal modem.
• Communication with dry block temperature
baths, thus offering true automatic
temperature calibration.
• Automatic pressure calibration through
communication with pressure controllers.
• Batch communication (field use) as well as
on-line communication (workshop use)
with QM6 QCAL
® software.
• Transmitter simulation mode allowing MC5
to replace a transmitter.
• Configurable ramp and step generation.
• User configurable resolution and filter
(damping) settings.
A
UTOMATIC
C
ALIBRATION