Atec Anritsu-MS2712E-MS2713E - Manual (Page 4)

Page 4 of 12
Spectrum Master™ MS2712E and MS2713E Specifications
2-Port Transmission Measurement (Option 0021)
Frequency
Frequency Range 2 MHz to 4 GHz (MS2712E), 2 MHz to 6 GHz (MS2713E)
Frequency Resolution 10 Hz
Output Power
High 0 dBm, typical
Low -30 dBm, typical
Dynamic Range
2 MHz to 4 GHz 80 dB
>4 GHz to 6 GHz 70 dB
Application Options Bias-Tee (On/Off), Impedance (50 , 75 , Other)
Bias-Tee (Option 0010)
Setup On/Off, Voltage, Current (Low/High)
Voltage Range +12 to +32 V
Current (Low/High) 250 mA/450 mA, 1 A surge for 100 ms
Resolution 0.1 V
GPS Receiver Option (Option 0031) (Antenna sold separately, P/N 2000-1528-R)
Setup On/Off, Antenna Voltage 3.3/5.0 V, GPS Info
GPS Time/Location Indicator Time, Latitude, Longitude and Altitude on display
Time, Latitude, Longitude and Altitude with trace storage
High Frequency Accuracy Spectrum Analyzer, Interference Analyzer, CW Signal Generator
when GPS Antenna is connected <±50 ppb with GPS On, 3 minutes after satellite lock in selected mode
Connector SMA, female