Atec Agilent-8133A - Manual

The Standard in Pulse Generator
Technology
Key Features
· 33 MHz to 3 GHz Frequency
· <100 ps transition times
· <5 ps pulse jitter
· ±0.5% ps Width Accuracy
· ±100 ps Width Accuracy
· ±150 ps Delay Accuracy
· 1 or 2 Output Channels
· 2
23-1 PRBS Generation
· SCPI Programming Commands
Agilent Technologies
8133A 3 GHz Pulse Generator
The need for pulse generation is
fundamental to any device
characterization task. The ability to
emulate the pulse conditions to which
the device will be subjected is
essential. This emulation should
include both typical and worst case
conditions. Such accurate emulation
requires superlative signal integrity
and timing performance.
Setting Standards
The Agilent 8133A 3 GHz Pulse
Generator provides pulses with
programmable period from 333 ps to
30 ns, full 3 GHz pulse capability on
all channels. The pulse width can be
programmed too, along with a delay
or the interchannel delay. At these
frequency ranges the transition time
performance becomes critical; less
than 100 ps is specified, less than
60 ps is typical, so excellent signal
integrity is assured. And last but not
least, a typical jitter of 1 ps creates
precise and accurate timing
conditions.
Agilent Technologies
8133A 3 GHz Pulse Generator
Technical Specifications