Atec Empower-2170 - Manual

Solid State Broadband High Power Amplifier
2170 – BBS4A6AUT
1000 - 3000 MHz / 1000 Watts
The BBS4A6AUT (SKU 2170) is suitable for multi-octave bandwidth high
power CW, modulated, and pulse applications. This amplifier utilizes high
power LDMOS devices that provide wide frequency response, high gain, high
peak power capability, and low distortions. Exceptional performance, long-
term reliability and high efficiency are achieved by employing advanced
broadband RF matching networks and combining techniques, EMI/RFI filters,
and all qualified components. The amplifier is constructed within one single
5RU drawer including the forced air-cooling. The system comes standard to
operate from 180-260VAC single phase or can be ordered optionally with a
three phase AC supply.
The amplifier includes a built in control and monitoring system, with protection
functions which preserve high availability. Remote management and
diagnostics are via an embedded web server allowing network managed site status and control simply by connecting the unit’s
Ethernet port to a LAN. Using a web browser and the unit’s IP address (IPV4, IPV6) allows ease of access with the benefit of multi-
level security. The control system core supports hardware encryption, runs an embedded OS (Linux), has a built-in non-volatile
memory for event recording, and factory setup recovery features. The extended memory option allows storage of control
parameters and event logs.
Empower RF’s ISO9001 Quality Assurance Program assures consistent performance and the highest reliability.

Solid-state linear design
 Suitable for CW, AM, FM and pulse (Consult factory for other modulation types)
 Compact Modular design
 50 ohm input/output impedance
 Built in Control, Monitoring and Protection functions
 High reliability and ruggedness
ELECTRICAL SPECIFICATIONS over temperature conditions (-10 to +50ºC)
Parameter Symbol Min Typ Max Unit
Operating Frequency BW 1000 3000 MHz
Power Output CW
(Note 1)
P
SAT
1000 Watt
Power Output @ 1dB Gain Compression
(Note 2)
P
1dB
500 Watt
Power Gain @ 1dB Gain Compression G
1dB
63 dB
Input Power for Rated P
SAT
P
IN
0 dBm
Input Power Range P
IN
-3.0 +3.0 dBm
Gain Flatness / Leveled ALC ∆G ±3.5/±1.0 dB
Gain Adjustment Range VVA 20 dB
Input Return Loss S
11
-10 dB
Noise Figure @ maximum gain NF 15 dB
Third Order Intercept Point
2-Tone @ 54dBm/Tone, 1MHz Spacing
IP3 +64 dBm
Harmonics @ P
OUT
= 1000W
(without Harmonic Suppression Filters)
2
nd
-20
dBc
3 rd -10
Spurious Signals Spur -60 dBc
Operating Voltage – (
single Ф)
V
AC
180 220 260 Volt
Operating Voltage –
(3 Ф)
V
AC
208 Volt
Power Consumption @ 1000W CW P
D
5000 Watt
Notes: 1. CW measurement performed in MGC Mode (Manual Gain Control)
2 .P1dB measurement performed with CCDF Method, IS-95, 1MHz BW.
MECHANICAL SPECIFICATIONS
Parameter Value Units
Dimensions W x H x D 17.5 x 8.75 x 22 Inc
Weight (Without Harmonic Suppression Filters) 95 lb.
RF Connectors Input/Output
Input: Type-N, Female
Output: Type-7/16-DIN, Female (optional Type-SC, Female)
RF Sample Type-SMA, Female
Blanking Input Type-BNC, Female
Cooling Built in forced-air cooling system
316 W. Florence Ave.
Inglewood, CA 90301 Ph. 1 (310) 412-8100
Fax. 1 (310) 412-9232
www.EmpowerRF.com
Stock No. 2170
NPI Rev 1.1 / 08-02-2013