Atec Amplifier-Research-500T1G2 - Manual (Page 3)

Page 3 of 3
MODEL CONFIGURATIONS, MODEL 500T1G2
Model Description Primary Power Weight Size (W x H x D)
500T1G2 With removable enclosure 208 VAC ± 10% three phase 50/60 Hz
3.3 KVA maximum
71 kg
(155 lbs)
50.3 x 25.4 x 83.8 cm
19.8 x 10.0 x 33.0 in
500T1G2M1 See separate specification sheet
500T1G2M2 Shipped w/o an outer cabinet 208 VAC ± 10% three phase 50/60 Hz
3.3KVA maximum
57 kg
(125 lbs)
48.3 x 22 x 81 cm
19.0 x 8.75 x 31.75 in
500T1G2M3 With removable enclosure 190-260VAC single phase 50/60 Hz
3.3KVA maximum
71 kg
(155 lbs)
50.3 x 25.4 x 83.8 cm
19.8 x 10.0 x 33.0 in
500T1G2M4 Shipped w/o an outer cabinet 190-260 VAC single phase 50/60 Hz
3.3KVA maximum
57 kg
(125 lbs)
48.3 x 22 x 81 cm
19.0 x 8.75 x 31.75 in
500T1G2M5 Enclosure removed for rack mounting -
slides and front handles installed
208 VAC ± 10% three phase 50/60 Hz
3.3KVA maximum
59 kg
(130 lbs)
48.3 x 22 x 81 cm
19.0 x 8.75 x 31.75 in
500T1G2M6 Enclosure removed for rack mounting -
slides and front handles installed
190-260 VAC single phase 50/60 Hz
3.3KVA maximum
59 kg
(130 lbs)
48.3 x 22 x 81 cm
19.0 x 8.75 x 31.75 in
500T1G2M7 Basic Model with additional RF sample
port. Type N, Rear Panel, for reverse
power
208 VAC ± 10% three phase 50/60 Hz
3.3KVA maximum
71 kg
(155 lbs)
50.3 x 25.4 x 83.8 cm
19.8 x 10.0 x 33.0 in
500T1G2M8 Enclosure removed with added carry
handles on the sides and pull handles on
the front
208 VAC ± 10% three phase 50/60Hz
3.3KVA maximum
59 kg
(130 lbs)
48.3 x 22 x 81 cm
19.0 x 8.75 x 31.75 in
500T1G2M9 Shipped w/o an outer cabinet, flatness ±
2.5 dB max at rated power, and a video
pulse capability to offer blanking
capability to use for noise quieting.
VIDEO PULSE CAPABILITY
-Pulse Width: 0.05 -20 microseconds
-Pulse Rate (PRF): 10 kHz to 100 kHz
-RF Rise and Fall: 30 ns max (10% to 90%)
-Delay: 300 ns max from pulse input to
RF90%
-Pulse width distortion: ±30 ns max (50%
points of output pulse width compared to
50% points of input pulse width)
NOISE POWER DENSITY
-(pulse off); -140 dBm/Hz (typical)
CONNECTOR
-Video: BNC – female on rear panel
190-260 VAC single phase 50/60Hz
3.3KVA maximum
57 kg
(125 lbs)
48.3 x 22 x 81 cm
19.0 x 8.75 x 31.75 in
500T1G2M10 Basic Model with additional RF sample
port. Type N, Rear Panel, for reverse
power
190-260 VAC single phase 50/60 Hz
3.3KVA maximum
71 kg
(155 lbs)
50.3 x 25.4 x 83.8 cm
19.8 x 10.0 x 33.0 in
500T1G2M11 See Individual Specification Sheet