Atec Agilent-E9304A - Manual (Page 5)

5
The E-series E9300 power sensors work with the
Agilent EPM-series E4418 single-channel and
E4419 dual-channel power meters. These meters
provide accurate and repeatable power measure-
ments, fast measurement speeds, and an easy-to-
use interface for many power applications. “B” ver-
sions of these power meters offer RS-232 and RS-
422 serial interfaces for PC connectivity and an
internal, rechargeable battery option for field use.
The EPM series power meters come with a stan-
dard 1-year global warranty.
E4418A or E4419A models require a simple hard-
ware and firmware upgrade to operate with the
E9300 power sensors. The hardware and firmware
upgrade can be performed at a local Agilent
Technologies service center or at the customer site.
Firmware upgrade information is accessed from
the World Wide Web, free of charge, at
www.tmo.agilent.com/tmo/datasheets/English/E4418B.html
(
or E4419B.html). Click on the Related Info tab then
follow the firmware downloading instructions.
E4418B or E4419B models with the prefix US3847
or GB3841 require only a firmware upgrade. Again
this can be carried out at a Agilent Technologies
service center or on-site. Information is available
from the URL given above.
For more information on hardware and firmware
upgrades, contact your Agilent Technologies sales
representative or local Agilent Technologies service
center.
More information
For more information about the E-series E9300
power sensors and EPM series power meters, visit
our website at
www.tm.agilent.com
Or ask your Agilent Technologies sales representa-
tive for any of the following literature:
EPM Series Power Meter, E-Series 5965-6382E
and 8480 Series Power Sensor,
Data Sheet
EPM Series Power Meters, Brochure 5965-6380E
Fundamentals of RF and Microwave 5965-6630E
Power Measurements, Application
Note 64-1
4 Steps for Making Better Power 5965-8167E
Measurements Simple, Appliction
Note 64-4
Fast, accurate measurements with EPM-series power meters