Atec Avtron-K571 - Manual

Model K571 Resistive
Portable Load Bank - 1000 amps
Typical Designs Available are:
900 or 1000 amps, 52 volt DC load, or
1000 amp, 28 volt DC load
Custom Designs also Available
Cooling Air Loss Protection
Portable Load Bank
Master Load Switch
Meters Indicate Load Status
Ammeter and Voltmeter Available
power test solutions
The K571 Load Bank is suitable for
testing DC generating systems, con-
verters, transformer-recitifier units,
battery systems, and controls. The
K571 is equipped with two fixed and
two lockable swivel casters which
allow the unit to be moved easily
from one test site to another.
Electrical connections are simplified
by the easy access terminals located
behind the access door on the front
of the unit. A safety interlock switch
disables load application if the access
door is opened for operator safety.
The load bank is completely self-
contained with a blower included for
cooling the load resistor elements.
Control and blower power is derived
from an externally supplied 120 VAC,
single phase, 60 Hz source. A line
cord is included for convenient
power connection.
The control panel is equipped with
carefully arranged toggle switches
and status indicators. Large, easy
to read voltmeter and ammeter are
available mounted on the control
panel to provide accurate measure-
ments during testing.
The K571 is a rugged, easy to use,
indoor DC load bank that is designed
to provide years of reliable operation
in laboratory and industrial environ-
ments to test batteries, transformer-
recitifiers, and other DC power
sources.
Legendary Avtron quality combined
with simple operation and mainte-
nance will provide years of trouble
free service.
Avtron’s extensive line of Load Bank
and Industrial Resis tor Products are
solid performers used throughout
the world.
For total technical support or
additional information, please
contact Avtron at (216) 573-7600
or [email protected].
The Avtron Model K571 Load Bank is designed for
indoor operation and is for testing DC power sources.