Atec Chroma-63600 Series - Manual (Page 7)

The 63600 loads can be operated from
the front panel controls or from available
softpanels. This user friendly software
includes all functions of 63600s and is easy
to understand and operate. The 63600 can
be controlled via GPIB, USB and Ethernet
interfaces for remote control and automated
testing applications.
Main Operation Menu OCP Test
Battery Discharge Test User Defined Waveform Charger Test
The 63600 loads include a unique timing & measurement function allowing
precise time measurements in the range of 2ms to 100,000s. This feature
allows users to set the final voltage & timeout values for battery discharge
testing and other similar applications.
Figure 5 : Battery Discharge Testing
The 63600 series loads also include built-in
Maximum Power Point Tracking function
which is used for solar panel test. Just connect
the solar panel to the 63600 loads, the loads
will track the maximum power point of solar
panel using a high speed built-in algorithm.
The 63600 can also calculate the consumption
of energy automatically.
SOFT PANEl
TImINg FuNCTION
mPPT FuNCTION
Isc
Vmp Voc
Imp