Atec Agilent-N6700 Series - Manual (Page 14)

14
Ordering Information
The DC power analyzer system
is available two ways
1. You can order an N6700B,
N6701A or N6702A mainframe
and various modules as separate
products. (See steps below.) Each
item will arrive in a separate box
so that you can assemble the
system yourself.
2. You can order an N6710B, N6711A
or N6712A system, which is a
build-to-order system that is
shipped as a fully assembled
multiple-output power supply.
(See pages 18 and 19 for N6710B,
N6711A and N6712A ordering
information.
When ordering the N6700 MPS as a
mainframe and modules, follow these
steps.
Step 1
Select which mainframe you want
based on your power requirements.
Step 2
Select the appropriate documentation
and line cord options.
Step 3
Order 1 to 4 modules (see next page).
If the sum of the power of the
modules exceeds the available output
power rating on the mainframe, see
page 4 for an explanation of Agilent’s
power management capability. Each
module occupies one module slot,
except for the N6753A–N6756A and
N6763A–N6766A which occupy two
module slots.
Mainframes
N6700B Low-profi le modular power system mainframe, 400 W
Holds 1 to 4 modules. Total available output power = 400 W
N6701A Low-profi le modular power system mainframe, 600 W
Holds 1 to 4 modules. Total available output power = 600 W
N6702A Low-profi le modular power system mainframe, 1200 W
Holds 1 to 4 modules. Total available output power = 1200 W
Available options to the N6710B, N6711A, and N6712A systems
N6709A Rack mount kit
Required for rack mounting. Standard rack mount hardware will not
work.
N6708A Filler panel kit
Required when you have less than 4 modules in a mainframe.
Each fi ller kit contains 3 fi ller panels.
OL1 Full documentation on CD-ROM and printed users guide
900 Power cord, United Kingdom, P/N 8120-1351
901 Power cord, Australia, New Zealand, P/N 8120-1369
902 Power cord, Europe, Korea, P/N 8120-1689
903 Power cord, USA, Canada, 120 V, P/N 8120-4383
904 Power cord, USA, Canada, 240 V, P/N 8120-0698
906 Power cord, Switzerland, P/N 8120-2104
912 Power cord, Denmark, P/N 8120-2956
917 Power cord, South Africa, India, P/N 8120-4211
918 Power cord, Japan, 100 V, P/N 8120-5342
Note: For model N6712A, the maximum output power is limited to 600
W at 100 VAC. To achieve full output power of 1200 W, you must use
option 929 and operate at 200 VAC.
919 Power cord, Israel, P/N 8120-6800
920 Power cord, Argentina, P/N 8120-6869
921 Power cord, Chile, P/N 8120-6980
922 Power cord, China, P/N 8120-8376
927 Power cord, Thailand, Brazil, P/N 8120-8871
929 Power cord, Japan, 200 V, P/N 8121-1392
Note: This option is available only on model N6702A
Step 4
For proper operation, you must fill any
empty module slots with filler panels.
When configuring a mainframe with
less than four filled module slots, you
MUST order a filler panel kit. Each kit
contains three filler panels. Each filler
panel fills one empty module slot.
Step 5
If you will be rack mounting your
N6700, you MUST order the rack
mount kit.