Atec Agilent-mso7104a - Manual (Page 15)

Mixed signal capture and viewing. With 2 or 4
scope channels plus 16 logic channels, MSOs
uniquely combine the detailed signal analysis
of a scope with the multichannel timing
measurements of a logic analyzer. 8 Mpts of
memory captures long time periods and supports
high sample rates, allowing you to quickly zoom
in on areas of interest. Serial bus triggering and decoding (optional).
Trigger on the industry’s most popular standards,
including I
2 C, SPI, CAN, LIN, RS-232/UART and
Flexray. Your decoding options display responsive
on-screen decode of serial bus.
Battery-power option. Make measurements
where line power isn’t available with an optional,
internal, rechargeable lithium ion battery.
Models and specifi cations Scope additions and enhancements
100 MHz 300 MHz 500 MHz 1 GHz Bandwidth
Sample rate
Channels
Display
Display update rate
Memory
Vertical resolution
Vertical sensitivity
Bandwidth limit
Maximum input
voltage
Input impedance
Timebase range
Time scale accuracy
Triggering
Dimensions
Weight
2 GSa/s each channel 4 GSa/s max, 2 GSa/s each channel
2 or 4 scope channels on DSOs, 2 or 4 scope channels + 16 logic channels on MSOs
6.3” color XGA LCD (1024 x 768) with 256 intensity levels
Up to 100,000 waveforms/sec in real-time mode
Standard 8 Mpts
8 bits, up to 12 bits in high-resolution or averaging modes
1 mV/div to 5 V/div 2 mV/div to 5 V/div
20 MHz 25 MHz
CAT I 300 Vrms, 400 Vpk; CAT II 100 Vrms, 400 Vpk (1 Mohm)
5 Vrms CAT I (50 ohm)
1 MΩ ± 1% || 11pF 1 MΩ ± 1% || 14 pF or 50 Ω ± 1.5% selectable
5 ns/div to 50 s/div 2 ns/div to 50 s/div 1 ns/div to 50 s/div 500 ps/div to 50 s/div
15 ppm ≤ ± (15+2*(instrument age in years)) ppm
Edge, pulse width, pattern, TV, duration, sequence, serial bus
(I 2 C, SPI, RS-232/UART CAN, LIN and USB)
39.9 cm wide x 18.8 cm high x 28.2 cm deep (with handle)
4.9 kg
Probes – Improve your measurement reliability with our comprehensive
selection of probes:
• DSO/MSO603xA, 605xA and 610xA come with the 10073D 10:1,
500 MHz passive probe; DSO/MSO601xA comes with the 10074D
10:1, 150 MHz passive probe
• See our complete list of compatible probes on page 31
Accessories – Don’t forget options that make measurements faster and
more convenient, such as the hard transit case, scope cart, evaluation kit
and rackmount kit.
Portable power – Consider the battery option for measurements on
the go.
DSO-to-MSO upgrades – Protect your investment with the fl exibility to
upgrade to MSO after purchase.
Applications – Expand your scope’s capabilities with our powerful lineup
of applications:
• Options include I 2 C, SPI, CAN/LIN, RS-232, FPGA, FlexRay, power,
offl ine analysis, vector signal analysis, mask testing and segmented
memory
• See our complete list of applications on page 26
www.agilent.com/fi nd/6000family | 15
Also available in a compact, rack-mountable
design. The 6000L is 1U high and 19” wide to
save valuable rack space. Side and rear air vents
(no top or bottom air vents) let you mount other
instruments directly above or below. Rack mount
brackets and rack rails are standard with every
unit.
DSO/MSO601xA DSO/MSO603xA DSO/MSO605xA DSO/MSO610xA