Atec Agilent-8757D - Manual (Page 11)

11
Power splitters
The Agilent 11667 series power splitters are two-
resistor splitters recommended for external source
leveling or for ratio measurement applications.
General information
Impedance: 50 ohms nominal
Maximum input power: +27 dBm
Dimensions: 46 H x 52 W x 21 mm D
(1.8 x 2.0 x 0.8 in)
Weight: Net 0.14 kg (0.3 lb), Shipping 0.22 kg (0.5 lb)
Power dividers
The Agilent 11636 series power dividers are three-
resistor splitters intended for direct power divid-
ing applications such as transmission line fault
location. The 11636 series can also be used as a
power combiner.
General information
Impedance: 50 ohms nominal
Dimensions: 42 H x 45 W x 18 mm D
(1.6 x 1.8 x 0.7 in)
Weight: Net 0.14 kg (0.3 lb), Shipping 0.45 kg (1.0 lb)
Power splitters
Frequency Input Output Insertion loss Equivalent Output
Model range connector connectors Frequency (typical) output match tracking
11667A DC to 18 GHz Type-N (f) 1 Type-N (f) DC to 4 GHz 6.6 dB 1.10 SWR 0.15 dB
4 to 8 GHz 7.0 dB 1.20 SWR 0.20 dB
8 to 18 GHz 7.8 dB 1.33 SWR 0.25 dB
11667B DC to 26.5 GHz 3.5 mm (f) 3.5 mm (f) DC to 8 GHz 6.5 dB 1.22 SWR 0.25 dB
8 to 18 GHz 7.0 dB 1.22 SWR 0.25 dB
18 to 26.5 GHz 7.3 dB 1.22 SWR 0.40 dB
11667C DC to 50 GHZ 2.4 mm (f) 2.4 mm (f) DC to 18 GHz 6.0 dB 1.29 SWR 0.30 dB
18 to 26.5 GHz 7.0 dB 1.20 SWR 0.35 dB
26.5 to 40 GHz 8.0 dB 1.50 SWR 0.40 dB
40 to 50 GHz 8.5 dB 1.65 SWR (typical) 0.40 dB
Power dividers
Frequency Input Output Output Output
Model range connector connectors Frequency match tracking
11636A DC to 18 GHz Type-N (m) Type-N (f) DC to 4 GHz 1.25 SWR 0.20 dB
4 to 10 GHz 1.25 SWR 0.40 dB
10 to 18 GHz 1.35 SWR 0.50 dB
11636B DC to 26.5 GHz 3.5 mm (f) 3.5 mm (f) DC to 10 GHz 1.22 SWR 0.25 dB
10 to 18 GHz 1.29 SWR 0.50 dB
18 to 26.5 GHz 1.29 SWR 0.50 dB
1. Option 001 changes the input connector to Type-N (m).