Atec CorDEX-UT5000 - Manual (Page 2)

For more information and customer testimonials, contact...
CorDEX Instruments Ltd
Unit 1, Owens Road,
Skippers Lane Industrial Estate,
Middlesbrough,
Cleveland TS6 6HE
Tel: +44 (0) 1642 454373
Tel USA: 1 877 836 0764
Email: [email protected]
Web: www.cordexinstruments.com
Specifications
ATEX Certificate No: Baseefa11ATEX0114
IECEx Certificate No: IECEx BAS 11.0094
ATEX/IECEx Certificate Type: Ex ib IIC T4 Gb / Ex ibD IIIB T200˚C Db
Memory Stores up to 1000 measurements*
Screen 8cm (3.1inch) RGB TFT colour screen with backlight
Right/left handed set up
Transducer Dual Element
Measurements MultiECHO™
Echo-Echo
Corrosion Mode
Pulse Rate Standard transmit pulse rate of 4Hz
Adjustable from single shot up to 8Hz
Receiver Bandwidth 1MHz to 15MHz (-3dB points)
Frequency 4MHz, 3mm up to 100mm (0.02in to 3.9in)
Accuracy +/- 0.05mm (0.002in)
RFID Tag Reader » Operates with 13.54MHz passive tags
» Detection range up to 5cm (1.9in)
» SupportsISO/IEC15693-2,ISO/IEC18000-3 tag formats
Battery Details » Lithium thionyl chloride primary 3.6V cell
» 100 hours continuous operation with back light
restrictions low battery warning
Operating Temperature -10 to +50C (14 ̊F to 122 ̊F)
Weight 1Kg (2.2lb)
» Battery Pack
» 2 x Wrist strap
» 5 x ATEX RFID tags
» 1 x Calibration Block
UT5000 is supplied complete as standard with:
» UT5000
» Hard carry case
» 1 x Probe
» USB communication cable
» Couplant gel
EchoEcho Technology
Measure thicknesses through
painted surfaces.
Why not visit CorDEX Instruments website for
the latest news and downloads, or even come
and join our CorDEX Instruments Community
and learn more about the technology CorDEX
Instruments provide.
CorDEX CONNECT™ System Requirements
Windows Version Minimum Recommended
XP 512MB RAM 1024MB RAM
Vista, 7 1024MB RAM 2048MB RAM
Requires Adobe Reader to view the reports created
Corrosion Mode
Continuous, real time measurements
are logged with Min-Max- Average
thickness readings
MultiECHO TM Technology
Brackets four echoes before providing
a reading, reducing intermittent
readings caused by irregular echoes
Material Velocity Tables
Drop-down menus to select the
correct material velocity
Re
f.ID 2301, R
ev.
C
Cor DEX Instruments reserve the right to make changes to the
instrument at anytime and without notice.
*Check operations maintenance manual for compatibility.
*This number may decrease with the number of saved multi-point readings.
Authorised distributor