Atec EM-Test-UCS500N5V - Manual (Page 3)

DATA SHEET > UCS 500N5V > 20130322
TECHNICAL DETAILS
GENERAL DATA
INTERFACES
Serial interface USB
Parallel interface IEEE 488, addresses 1 - 30
CN interface 15pin SubD connector to control an
external coupling network
Fail inputs DUT monitoring via Fail1 and Fail2
input (one each)
DIMENSIONS
Dimensions 19", 3HU
Weight approx. 15kg
MAINS
Supply voltage 115V/230VAC +10%/-15%
Power approx. 75W
Frequency 50/60Hz
Fuses 2 x T 2AT (230V) or 2 x T 4AT (115V)
SAFETY
Safety standard EN/IEC 61010
Security circuit Control input (24VDC)
Warning lamp Floating contact (max. 230V/6A)
ACCESSORIES INCLUDED
Mains supply Plug depends on the country of use
DUT supply Plug depends on the country of use
DUT adapter Socket depends on the country of
use
Operation manual,
Calibration certificate,
iec.control remote control software
OPTIONS
OPTIONAL ACCESSORIES
CNV504Nx Coupling network for 4 signal/data
lines as per IEC 61000-4-5
CNV508Nx Coupling network for 8 signal/data
lines as per IEC 61000-4-5
CNI 508N1
Assembly Set of coupling/decoupling and
protection networks for testing
unshielded and shielded high-speed
communication lines (Ethernet lines)
CNV 504S1 Coupling network for 4 telecom lines
as per IEC 61000-4-5
CNV 508S1 Coupling network for 8 telecom lines
as per IEC 61000-4-5
IMN 2 Impedance matching adapter to
match direct output to 2ohm source
impedance
OPTIONAL EQUIPMENT
CNV 503Ax 3-phase coupling/decoupling
networks as per IEC 61000-4-5 up to
100A per phase
CNI 503Ax 3-phase coupling/decoupling
networks as per IEC 61000-4-4 and
-4-5 up to 100A per phase
iec.control 1 Remote control and documentation
software, including standard test
routines and reporting capabilities.
www.emtest.com © EM TEST > PAGE 3/4