Atec EM-Test-EFT-500N5 Series - Manual

DATA SHEET > EFT 500N5-series > 20130321
EFT 500N5 SERIES
ELECTRICAL FAST TRANSIENT GENERATOR
FOR TESTS ACCORDING TO ...
> ANSI/IEEE C62.41
> EN 61000-4-4
> EN 61000-6-1
> EN 61000-6-2
> IEC 60601-1-2
> IEC 61000-4-4
> IEC 61326
> IEC 61850-3
EFT 500N5 SERIES - EFT/BURST TESTER
The EFT 500N5 series are the state-of-the-art EFT/Burst testers with a built-in coupling/decoupling network for single phase
or three-phase mains supply lines and a HV terminal to connect a capacitive coupling clamp.
The spike frequency can be varied from as low as 100Hz up to 1,000kHz. The EFT 500N5 is capable to generate 10,000
spikes per second or up to 1,000 spikes per burst.
Its performance fully complies with IEC 61000-4-4 Ed.2:2004. Pre-programmed Standard Test routines and a number of
selected User Test routines make the EFT 500N5 an optimum standalone solution for both testing during development and
final testing of products and sub-assemblies.
HIGHLIGHTS
> 10,000 pulses/sec.
> 4.8kV Burst voltage
> Spike frequency up to 1MHz
> Built-in 1ph or 3ph coupler up to 50A
> Pulse verification acc. to Ed.2 on each coupling
path
APPLICATION AREAS
INDUSTRY
MEDICAL
BROADCAST
RESIDENTIAL
TELECOM
COMPONENTS
www.emtest.com © EM TEST > PAGE 1/3