Atec EM-Test-PFS200N User Manual

Page 2

DATA SHEET > PFS 200N-series > 20100408

TECHNICAL DETAILS

BENEFITS

The PFS 200N is a standalone tester providing an
electronic switch to perform voltage dips and drops
(micro-interruptions) with fast rise and fall times of 1
microsecond. For voltage dips two DC voltage supplies are
required while for for voltage drops (micro-interruptions)
only one DC voltage supply is needed. The PFS 200N has
the ability to control one external DC voltage source by
means of an analog DC signal. The PFS 200N can also be
easily integrated into a complete test set-up.
Operation is possible both manually and by software via
USB or GPIB. Fail inputs allow to control an ongoing test
sequence based on the status of the DUT.
Pre-programmed Standard Test routines allow highest
user convenience. Still the PFS 200N offers the Quick
Start test routine where parameters can be changed
on-line during a test to evaluate the susceptibility level of
an individual DUT.

OPERATION

EASY TO OPERATE

Front panel menu and function keys enable the user to
program his test routines quickly and accurately. The
cursor allows fast control of all test parameters of the
programmed routine, thus test procedures are simplified
and confidence is generated that every step is carried out
correctly.

SOFTWARE

ISO.CONTROL - SOFTWARE FOR CONTROL AND
DOCUMENTATION

Outstanding user convenience, clearly structured
windows and operation features and the EM TEST
standards library along with the flexibility to generate
user specific test sequences very easily are the main
features of iso.control software. The software is
automatically configured according to the connected EM
TEST generators. iso.control software covers
international/national standards and most of the
manufacturer standards and is continuously updated.
Extensive reporting capabilities help the user to create
test reports that meet international requirements.
ISMISO is supported by Windows 98, Windows 2000,
Windows XP, Windows Vista and Windows 7. Remote
control is achieved either via USB or GPIB. iso.control
supports a wide range of GPIB cards of National
Instruments.

AUXILIARY DEVICES

RDS 200N - EXTERNAL CONTROLLED DC POWER SUPPLY

In order to generate any voltages between the level of the
battery supply and zero for voltage drops
(micro-interruption) tests a controlled DC supply is
needed. The RDS 200N perfectly fits these requirements
and is controlled by the analog DC output signal of the
PFS 200N.
The RDS 200N is usually connected to the PF2 input of the
PFS 200N.