Atec EM-Test-LD200N100 - Manual (Page 2)

DATA SHEET > LD 200N100 > 20130607
TECHNICAL DETAILS
LOAD DUMP GENERATOR
PULSE SPECIFICATION
Voltage (o.c.) 20 V - 200 V ± 10%
ISO PULSE 5 AND 7
Rise time 5 ms - 10 ms (10 - 90%)
Pulse duration 40 - 400 ms (10 - 10%)
Int. resistor 0.5 ohm - 38 ohm, selectable in
steps of 0.1 ohm
Repetition rate Min. 30 s
ISO 16750-2, 12V SYSTEM
Voltage (o.c.) +79V to 101V ± 10%
Rise time 10ms (+0/-5ms)
Pulse duration 40 - 400ms ± 10% (10 - 10%)
Int. resistor 0.5ohm - 4ohm
ISO 16750-2, 24V SYSTEM
Voltage (o.c.) +151 V to 202 V ± 10 %
Rise time 10ms (+0/-5ms)
Pulse duration 100 - 350ms ± 10% (10 - 10%)
Int. resistor 1ohm - 8ohm
ISO 7637-2:2004, 12V SYSTEM
Voltage (o.c.) +65V to 87V ± 10%
Rise time 10ms (+0/-5ms)
Pulse duration 40 - 400ms ± 10% (10 - 10%)
Int. resistor 0.5ohm - 4ohm
ISO 7637-2:2004, 24V SYSTEM
Voltage (o.c.) +123V to 174V ± 10%
Rise time 10ms (+0/-5ms)
Pulse duration 100 - 350ms ± 10% (10 - 10%)
Int. resistor 1ohm - 8ohm
LOAD DUMP GENERATOR
SAE J1455 FOR 12 V BATTERY SUPPLY
Voltage (o.c.) +86 V ± 10%
Rise time 100 us (10% - 90%)
Pulse duration 400 ms ± 10% (10 - 10%)
Int. resistor 0.4 ohm
SAE J1455 FOR 24 V BATTERY SUPPLY
Voltage (o.c.) +122 V ± 10%
Rise time 100 us
Pulse duration 400 ms ± 10% (10 - 10%)
Int. resistor 0.8 ohm
JASO PULSE A1
Voltage (o.c.) +70 V ± 10%
Rise time 1 us (10% - 90%)
Pulse duration 200 ms ± 10% (measured at tau)
Int. resistor 0.8 ohm
Capacitor 110 mF
JASO PULSE B1 (FIELD DECAY)
Voltage (o.c.) -80 V ± 10%
Rise time 1 us (10% - 90%)
Pulse duration 6 0ms (measured at tau)
Int. resistor 8 ohm
Capacitor 3 mF
JASO PULSE D1
Voltage (o.c.) +110 V ± 10%
Rise time 1 us (10% - 90%)
Pulse duration 400 ms (measured at tau)
Int. resistor 1.5 ohm
Capacitor 73 mF
www.emtest.com © EM TEST > PAGE 2/6