Atec AR-CI00401A - Manual (Page 2)

Page 2 of 2
Connections
RF Out Type N (front)
Monitor Port In Type N (front)
Signal Generator Out Type N (rear)
Directional Coupler In Type N (rear)
Amplifier Out/In Type N (rear)
Pulse In BNC (rear)
Communication GPIB (IEEE 488) (rear)
Directional Coupler Fwd Out Type SMA (rear)
Directional Coupler Fwd In Type SMA (rear)
Directional Coupler Rev Out Type SMA (rear)
Directional Coupler Rev In Type SMA (rear)
Monitor Port Out Type SMA (rear)
Monitor Port In Type SMA (rear)
Power Meter Calibration Port Out Type SMA (rear)
General
Power 115/230 VAC
50/60 Hz, single phase 16A
Breaker 2 pole, 20A
Cooling active cooling, air ventilation
Environmental conditions 10°C - 40°C
Dimensions, 50.3 x 42.2 x 52.1 cm
19.8 x 16.6 x 21.7 in
Weight 22.7 kg (50.0 lb)
Control Software
emcw ar e® Software Suite
PC Requirements
Computer 2 GHz Single Core Processor
Operating system Windows, XP, Windows Vista,
Windows 7
RAM 1 GB Minimum
Screen Resolution 1024 x 768
Ports 2 available USB 2.0 ports
Options
1 External USB data acquisition card.
2 Laptop PC with software preinstalled
MODEL CONFIGURATIONS
MODEL DESCRIPTION
CI00401AM1 Includes Option 2
CI00401AM2 Includes Options 1 and 2
ACCCESSORY KITS
Application Model Description
IEC 61000-4-6* TK1000 Conducted immunity test kit containing all the attenuators, injection
probes, calibration fixtures, calibration resistors, and termination
resistors necessary for IEC testing.
Automotive TK3000 Conducted immunity test kit containing all the attenuators, injection
probes, calibration fixtures, calibration resistors, and termination
resistors necessary for automotive testing.
*Requires additional AF10050, 10 dB, 50-watt attenuator.