Atec EM-Test-CWS500N1 - Manual (Page 3)

DATA SHEET > CWS 500N1 > 20120604
TECHNICAL DETAILS
OPTIONS
ATT6/75 6dB attenuator, 75W
ATT20/0.5 20db attenuator, 0.5W for the
calibration of CDNs and clamps
(included with the PM 1000)
CDNs As per IEC 61000-4-6 (refer to
separate list)
Clamps EM clamp as per IEC 61000-4-6
Current injection clamps
Current monitoring clamps
T-50 50ohm termination resistor for CDNs
and clamps
R-100x 150ohm-to-50ohm matching
impedance for calibration
Cal adapters For all types of CDNs and clamps
icd.control Extensive and most versatile remote
control and reporting software.
A standard library helps to configure
the test setup.
Multiple interruption functions
automated by IEEE instruments or
manually.
Easy to use or expandable to
complex test routines on the base of
vector definitions.
www.emtest.com © EM TEST > PAGE 3/4