Atec AEMC-1050 - Manual

1000V Digital/Analog Megohmmeter Models 1050 & 1060 (pdf) Rev. 05 01/05
Technical Assistance (800) 343-1391 www.aemc.com 1 of 9
The AEMC Megohmmeter Models 1050
and 1060 are an innovative family of
professional 1000V Digital/Analog
insulation testers. They are designed
to facilitate testing quickly and
accurately by incorporating automatic
measurement features and user
friendly functions.
Measurements are displayed on a
large dual-display LCD with bargraph
for quick viewing of changes or
trends. Resistance readings are
displayed on the larger display, and a
smaller display is used for test voltage
at the sample, test run times (mm:ss),
or alarm set points – all accessible at
the press of a button. A family of
visual indicators for safety and
information also compliments the
displays. A bright blue electro-
luminescent backlight makes for
clear readings in dark areas.
1000V Digital/Analog Megohmmeter
Models 1050 & 1060
Both models automatically provide the
DAR and PI ratios directly on the
display. User defined PI time intervals
may also be programmed. The user
may even select DAR or PI functions
before the test, and the megohmmeter
will stop at the appropriate time and
display the results. Test run times from
1 second to 59 minutes are also
directly programmable. The tested
sample Capacitance is available at the
end of each insulation resistance test.
For specific applications and operator
or equipment safety, test voltages may
be disabled to avoid any errors. An
automatic test inhibitor prevents testing
on live circuits above 25V. Discharge
test voltage may be displayed at the
completion of each test.
A memory feature in both models
permits storing, recalling and
displaying of resistance values taken at
user specified intervals during a test.
The Model 1060 has an RS-232
interface and a more extensive
memory function, which permits
the storage of results in files specific
to the device under test. Additionally,
it also has a built-in document function,
which prints out a preformatted report
on a serial or parallel printer.
A standard software package
(DataView
® ) enables the user to
display graphs and results for
complete documentation and
reporting. The Model 1060 can also
be programmed and run by a PC
with this software. This enables
tailored test programs, remote
operation and storing of information
directly into a PC.
Both models are built into a double
insulated field case with a detachable
accessory pouch.