Atec Biddle-CFL535E User Manual
Page 3
TDR2000/2P
Dual channel Cable Fault Locator
ORDERING INFORMATION
Item (Qty)
Order No.
Dual Channel cable fault locator
TDR2000/2P
Included Accessories
Battery charger UK
6121-538
Battery charger European
6121-539
Dual fused test lead set
6231-713
Test and carry pouch
6420-114
Serial data lead
25955-025
Carry strap for pouch
6220-611
Tracemaster software
6111-458
User Guide6172-662
UK
Archcliffe Road Dover
CT17 9EN England
T +44 (0) 1304 502101
F +44 (0) 1304 207342
UNITED STATES
4271 Bronze Way
Dallas TX 75237-1088 USA
T 800 723 2861 (USA only)
T +1 214 333 3201
F +1 214 331 7399
OTHER TECHNICAL SALES OFFICES
Norristown USA, Toronto CANADA,
Mumbai INDIA, Trappes FRANCE,
Sydney AUSTRALIA, Madrid SPAIN
and the Kingdom of BAHRAIN.
Registered to ISO 9001:2008 Reg no. Q 09250
Registered to ISO 14001:2004 Reg no. EMS 61597
TDR2000_2P_DS_en_V11
www.megger.com
Megger is a registered trademark
Battery Charger:
Supply voltage
UK and European 230 V a.c. ±10% 50 Hz
North American
115 V a.c. ±10% 60 Hz
SAFETY:
This instrument complies withIEC61010-1 for connection to live
systems up to 300 V CAT III phase to earth and 415 Vphase to
phase with fused leads.
EMC:
The instrument will comply with EN 61326-1, classified as ‘class
B’. If connected to a live domestic power supply, the operation of
this instrument could cause interference with other equipment,
connected to the same supply.
To reduce this interference, select the lowest voltage and
narrowest width pulse as consistent with accurate measurement.
During immunity tests there may be self-recovering loss of
function (i.e Performance criterion B).
MECHANICAL:
The instrument is designed for use indoors or outdoors and is
rated to IP54.
Case Dimensions:
250 mm L x 200 mm W x 110 mm D
Instrument weight: 1.5 kg (3.3 lbs)
Case material: ABS
TEST LEADS:
Two pairs of 2 meter long leads fitted with 30mm gape fused
croc clips.
9 way D-type connector for serial communication.
DISPLAY:
320 x 240 pixel backlight LCD.
ENVIRONMENTAL:
TDR2000/2P
Operational Temperature:
-15 ºC to +45 ºC (5 ºF to 113 ºF)
Storage Temperature
-20 ºC to +45 ºC (-4 ºF to 113 ºF)
NOTE:
Charging should not take place when the ambient temperature is
less than 0 ºC (+32 ºF)
Humidity:
<95% at +40 ºC non-condensing