Atec Doble-M4100 - Manual (Page 2)

TOGETHER WE POWER THE WORLD
Doble Engineering Company
85 Walnut Street
Watertown, MA 02472 USA
tel +1 617 926 4900
fax +1 617 926 0528
MKT-SL-M4100TS-12/08
Doble is certified ISO 9001:2000
Temperature Measurement:
Range: -20 °c to +50 °c
Resolution: 0.1 °c
Accuracy: ±4 °c
Requires optional temperature probe
ENVIRONMENTAL
Temperature :
Operating: -20 °c to +50 °c
Storage: - 40 °c to +70 °c
Humidity: 90% non-condensing
DIMENSIONS
Instrument: 10-1/4 in. H x 20 in. W x
25-1/4 in. D 26 cm H x
50.8 cm W x 64.1 cm D
High Voltage Cable: 60 ft./18 mt (other lengths
available as options)
Weights
Instrument: 95 lbs/45.5 kg
MAXIMUM INTERFERENCE
CONDITIONS AT LINE
Frequency
Electrostatic: 15 ma rms of interference
current into any lead or
cable with no loss of
measurement accuracy.
applicable to a maximum
ratio of interference
current to specimen
current of 20:1.
Electromagnetic: 500 μT, at 50 Hz in any
direction
For more information, contact
[email protected]
The M4100 unit is the foundation of the M4000 Diagnostic
Test System for Condition Assessment of Power Apparatus
STANDARDS
EMC Emissions
FCC 47 CFR Part 15 Class A Emissions requirements (USA)
EN 55011:1998/A1:1999/A2:2002 Group 1 Class A ISM Emissions requirements (EUROPE)
AS/NZS CISPR 11:2004 Class A ISM Emissions requirements (Australia)
EMC Immunity
EN 61326:1997/A1:1998/A2:2001/A3:2003
IEC 61000-4-2/3/4/5/6/11
IEC 801-2(1984) Electrostatic Discharge
ANSI/IEEE C37.90.1 Surge Withstand Capability
SAFETY
EN 61010-1 :2001 (2nd Edition)
ENVIROMENTAL
IEC 60068-2-2 Dry Heat
IEC 60068-2-1 Cold
IEC 60068-2-30 Damp Heat
MECHANICAL
IEC 60068-2-27 Shock
IEC 60068-2-6 Vibration
IEC 60068-2-6 Drop test
ASTM D999.75 Transport Shock Test
Specifications are subject to change without notice.