Atec Chroma-19020 Series - Manual (Page 4)

SPECIFICATIONS
19020: Multi-Channel Hipot Tester
19020-4: Multi-Channel Hipot Tester (4CH)
19021: Multi-Channel Hipot Tester (AC)
ORDERING INFORMATION
Model 19020 19020-4 19021 19022 19022-4
Mode AC/DC/IR AC/DC/IR AC DC/IR DC/IR
Channel 10 4 10 10 4
Withstanding Voltage Test
Output Voltage AC:0.05kV-5kV ; DC:0.05kV-6kV AC:0.05kV-6kV DC:0.05kV-8kV
Load Regulation 2% of setting + 0.1% of full scale
Voltage Resolution 2V
Voltage Accuracy 2% of setting + 0.1% of full scale
Cutoff Current AC : 0.01 ~ 10mA, DC : 0.001 ~ 5mA
Current Resolution AC : 1μA, DC : 0.1μA
Current Accuracy 1% of setting +0.5% of full scale
Output Frequency 50Hz / 60Hz
Flashover Detection AC : 1mA ~ 15mA, DC : 1mA ~ 5mA , step 0.1mA
Test Time 0.03 ~ 999.9 sec, continue
Ramp Time 0.1 ~ 999.9 sec, off
Fall Time 0.1 ~ 999.9 sec, off
Dwell Time 0.1 ~ 999.9 sec, off
Waveform Sine wave
Insulation Resistance Test(19020&19022 series only)
Output Voltage DC : 0.05 ~ 1kV
Voltage Resolution 2V
Voltage Accuracy 2% of setting + 0.1% of full range
IR Range 1MΩ ~ 50GΩ
Resistance Accuracy
≥ 500V
1MΩ ~ 1GΩ : ± 3% of reading + 0.1% of full range
1GΩ ~ 10GΩ : ± 7% of reading + 0.2% of full range
10GΩ ~ 50GΩ : ± 10% of reading + 1% of full range
≤ 500V 1MΩ ~ 1GΩ : ± 3% of reading + (0.2*500/Vs)% of full scale
Test Time 0.3 ~ 999.9 sec, continue
Memory Storage
Save/Recall 30 instrument setups with up to 10 test steps can be stored into and recalled from the internal memory
Secure Protection Function
Fast Output Cut-off
0.4ms after NG happen
Panel Operation Lock Present password
Interlock YES
GO/NG Judgment Window
Indication, Alarm GO : Short sound, Green LED, NG : Long sound, Red LED
Data Hold Least tests data memories
Memory Storage 30 instrument setups with up to 10 test steps
Interface
RS232 & Handler (Standard), GPIB (Optional)
CANBUS & data control interface are used for Max. 10 units of master & slaves connection
General
Operation Environment
18 to 28℃ (64 to 82℉), 70% RH.
Maximum relative humidity 80% for temperature up to 31℃ (88℉)
Decreasing linearly to 50% relative humidity at 40℃(104℉)
Power Consumption Standby : < 250W ; With rated load : <1000W
Power Requirements AC 100V~240V, 47~66 Hz
Weight Approx.40 kg
19022: Multi-Channel Hipot Tester (DC/IR)
19022-4: Multi-Channel Hipot Tester (DC/IR/4CH)
A190508: GPIB Interface
A190200: 19" Rack Mounting Kit for 19020 Series
A190201: 3-CH Scanner
*HV cable is optional for customized requirement.
Distributed by:
Worldwide Distribution and Service Network
19020-201108-2000
All specifications are subject to change without notice. Please visit our website for the most up to date specifications.
JAPAN
CHROMA JAPAN CORP.
472 Nippa-cho, Kouhoku-ku,
Yokohama-shi, Kanagawa,
223-0057 Japan
http://www.chroma.co.jp
E-mail:[email protected]
U.S.A.
CHROMA SYSTEMS
SOLUTIONS, INC.
25612 Commercentre Drive,
Lake Forest, CA 92630-8830
Tel: +1-949-600-6400
Fax: +1-949-600-6401
Toll Free: +1-866-600-6050
http://www.chromausa.com
E-mail: [email protected]
Developed and Manufactured by :
CHROMA ATE INC.
致茂電子股份有限公司
HEADQUARTERS
No. 66, Hwa-Ya 1st Rd.,
Hwa-Ya Technology Park,
Kuei-Shan Hsiang,33383
Taoyuan County, Taiwan
Tel: +886-3-327-9999
Fax: +886-3-327-8898
http://www.chromaate.com
E-mail: [email protected]
EUROPE
CHROMA ATE EUROPE B.V.
Morsestraat 32, 6716 AH Ede,
The Netherlands
Tel: +31-318-648282
Fax: +31-318-648288
http://www.chromaeu.com
E-mail: [email protected]
CHINA
CHROMA ELECTRONICS
(SHENZHEN) CO., LTD.
8F, No.4, Nanyou Tian An
Industrial Estate, Shenzhen,
China PC: 518052
Tel: +86-755-2664-4598
Fax: +86-755-2641-9620