Atec AEMC-6250 - Manual (Page 3)

MODEL 6250
ELECTRICAL
Range 5.0000mΩ 25.000mΩ 250.00mΩ 2500.0mΩ 25.000Ω 250.00Ω 2500.0Ω
Accuracy 0.05% 0.05% 0.05% 0.05% 0.05% 0.05% 0.05% +
+ 0.5μΩ + 3μΩ + 30μΩ + 0.3mΩ + 3mΩ + 30mΩ 300mΩ
Resolution 0.1μΩ 1μΩ 10μΩ 0.1mΩ 1mΩ 10mΩ 100mΩ
Test Current 10A 10A 10A 1A 100mA 10mA 1mA
Measurement Mode Selectable: Inductive (continuous test), Resistive (instantaneous test) or Auto (multiple tests)
Metal Type Selectable: Copper, Aluminum or Other Metal
Alpha Programmable from 000.00 to 99.99
Temperature Correction Manual or Automatic with 0.1° resolution
Reference Temperature Programmable from 32° to 130°F or -10° to 130°C
Ambient Temperature Programmable from 32° to 130°F or -10° to 130°C
Temperature Probe 100Ω platinum RTD
Resolution ± 0.1°F (0.1°C)
Accuracy ±0.9°F (±0.5°C)
Alarms Two – programmable set points from 0.0 to 2500.0Ω
Buzzer Programmable ON/OFF and volume level
Power Source Rechargeable 6V, 8.5 Ah NiMH batteries;
Battery Life Approximately 5000 10A tests
Battery Charging 120/240V AC ± 20% (45 to 400Hz) line voltage
Power Management Display powers down after 1, 5 or 10 minutes of inactivity (operator selectable)
Low Battery Indication is displayed when battery voltage is low
Memory Stores up to 1500 test results
Data in memory can be reviewed on the instrument display, on a PC or via direct printout
MECHANICAL
Dimensions 10.63 x 9.84 x 7.09" (270 x 250 x 180mm)
Weight 8.1 lbs (3.69kg)
Index of Protection IP53 (case open); IP64 (case closed)
DISPLAY
Display Type Large 50,000-count digital
Size 4 x 2.25" (102 x 57mm)
Backlight Blue electroluminescent
Color Safety yellow case; gray faceplate
COMMUNICATION
Interface Port PC, remote terminal, printer or trigger test from remote contact closure
ENVIRONMENTAL
Operating Temperature 14° to 132°F (-10° to 55°C); 10 to 80% RH (non-condensing)
Storage Temperature -40° to 140°F (-40° to 60°C)
SAFETY
Safety Rating EN 61010-1, 50V Cat. III
Double Insulation Yes
CE Mark Yes
10A Micro-Ohmmeter Model 6250 (pdf) Rev. 04 0306
Technical Assistance (800) 343-1391 www.aemc.com 3 of 5
Specifications