Atec AEMC-6250 - Manual (Page 2)

10A Micro-Ohmmeter Model 6250 (pdf) Rev. 04 0306
Technical Assistance (800) 343-1391 www.aemc.com 2 of 5
Features
• Measure from 0.0001mΩ
(0.1μΩ resolution) to 2500.0Ω
• Test current selection of 1mA, 10mA,
100mA, 1A and 10A
• RTD temperature probe to check
tested sample (optional)
• Selectable metal types
• Automatic and manual temperature
correction
• EMF levels measured and
eliminated in measurement
• Two programmable alarm set points
• Stores up to 1500 test results
• Selectable Inductive or Resistive
test modes
• Automatic multiple test mode
(multiple tests without pressing
the test button)
• Large multi-line electroluminescent
display
• Local or remote test setup and control
• Direct printout
• Internal rechargeable batteries –
conduct up to 5000 10A tests
• Rugged, double insulated
waterproof case
• CE Mark
Applications
• Aerospace metallic coating
resistance measurement
• Winding resistance measurement
of motors and transformers
• Bonding verification on earth/
ground systems
• Weld joint integrity verification
• Contact resistance measurement
of breakers and switchgear
• Aircraft and rail bonding checks
• Wire to terminal connections
and resistance checks
• Battery strap resistance checks
• Cable joint and bus bar connection
checks
• Mechanical bond tests
Verifying rail bonds with the Model 6250
Report printouts of the current measurement or any
measurement stored in memory is quick and easy.
Connect the printer to the interface port and press the
PRINT button – it’s that simple. All measurement results
are printed.