Channel expansion, 2600-ps-bat optional battery power supply – Atec Dewetron-DEWE-2600 User Manual
Page 4
102
DEWE-2600
2600-PS-BAT
Optional battery power supply
This option turns your DEWE-2600 into a fully battery powered instrument. The hot-
swappable batteries guarantee continuous operation without an external power
source. The instrument provides 3 slots for BAT-95WH batteries and can be oper-
ated for up to ~2 hours with 3 batteries installed. Since this time depends a lot on
the system configuration a DEWESoft plugin shows the battery status directly in the
software. Also alarm conditions can be set and the battery parameters can be dis-
played as additional measurement channels. Operating temperature is limited to
0 .. 45° C when batteries are charged.
System options and upgrades for DEWE-2600 series
Options
Description
DISP-15-TOUCH
Touchscreen for 15“ display
2600-FIREWIRE
PCI Express FireWire
®
interface for the DEWE-2600
2600-PS-BAT
Battery power supply with UPS function,
18 .. 24 V
DC
non-isolated input, incl. external AC power supply DEWE-POW-24-350,
3 slots for hot-swappable batteries, 3 batteries for appr. 3 hours operation included,
for DC operation always add DEWE-DCDC-24-300-ISO
DEWE-DCDC-24-300-ISO
External DC/DC converter with isolation,
9 to 36 V
DC
input range, Lemo EGJ.3B.302, incl. 2 m cable to banana jacks,
24 V
DC
output, 300 W, Lemo EGG.2B.302 socket
BAT-95-WH
Lithium-Ion battery, 14.4 V, 95Wh, max. 8A
BAT-CHARGER-1
Desktop battery charger for 1 battery, incl. external AC adaptor
BAT-CHARGER-4
Desktop battery charger for 4 batteries, incl. external AC adaptor
PS-BAT-REMOTE-ON
Special add-on for the battery power supply, one extra connection with a wake-up signal is needed to the
power supply input of the unit,
allows to automatically turn on the instrument when the ignition of the car is turned on, also turns off the
instrument when the car is turned off
Upgrades
Description
HDD-1000-SSD-128
Upgrade to 128 GB flash disk (replaces 1 TB hard disk),
max. data throughput 40 MB/s
HDD-REM-1000
Spare removable hard disk, 1 TB
2600-SYSTEM-SSD-64
Additional internal SSD 64 GB for Windows and DEWESoft, the removable hard disk remains
2600-SYSTEM-SSD-64
Additional internal Solid State Disk
DEWE-DCDC-24-300-ISO
Isolated DC power supply, needed
to operate units with 2600-PS-BAT
option from DC
2600-CSMK1
Car seat mounting kit
HDD-REM-600
Spare removable harddisk, 600 GB
for classified work
Channel Expansion
Signal conditioning for slow signals is added by connecting EPAD2 series modules to the systems EPAD interface.
For expanding the number of dynamic channels there are three choices:
Analog cable: Additional A/D
boards are installed into the basic
instrument and external signal con-
ditioning, e.g. DAQ modules in a
DEWE-30 chassis, is connected by
means of an analog signal cable.
DEWE-NET: Several instruments are con-
nected via Ethernet. Each unit requires
an ORION-SYNC option. For short dis-
tances a sync cable is used if the units
are far from each other a sync interface
like DEWE-CLOCK is used.
PCI expansion: A PCI-HOST card
is installed into the basic instru-
ment and external signal condi-
tioning, e.g. DAQ modules in a
DEWE-50 chassis, is connected by
means of a PCI cable.