Channel expansion – Atec Dewetron-DEWE-3020 User Manual
Page 4
EPAD2-TH8
110
3020-CB8-BNC
and 3020-CB8-B
connection blocks
DEWE-31-16
PS-BAT
Battery power supply
DEWE-POWERBOX-12
DC Power distribution box
DEWE-30-8-EXP
8 additional amplifier slots
Optional battery charger
(range: 90 to 260 V
AC
)
15.4“ touch-screen
DVD-BURNER
for data backup to DVD
or CD
The carrying bag is
included as standard
accessory
Internal 256 GB Solid State
Disk for maximum reliability
DEWE-3020
Channel Expansion
Signal conditioning for slow signals is added by connecting EPAD2 series modules
to the systems EPAD interface.
ANALOG
DEWE-30-16
DEWE-30-16
Analog cable: Additional A/D boards
are installed into the basic instrument
and external signal conditioning, e.g.
DAQ modules in a DEWE-30 chassis,
is connected by means of an analog
signal cable.
ETHER
NET
DEWE-3021
DEWE-NET: Several instruments are con-
nected via Ethernet. Each unit requires
an ORION-SYNC option. For short dis-
tances a sync cable is used if the units
are far from each other a sync interface
like DEWE-CLOCK is used.
PCI
DEWE-50-32
PCI expansion: A PCI-HOST card is
installed into the basic instrument and
external signal conditioning, e.g. DAQ
modules in a DEWE-50 chassis, is con-
nected by means of a PCI cable.
For expanding the number of dynamic channels there some choices:
DEWETRON GmbH • Parkring 4 • A-8074 Graz-Grambach • Tel (0043) 316 3070 0 • Fax (0043) 316 3070 90 • [email protected]