Atec Dewetron-DEWE-3020 - Manual (Page 3)

109
Software Components Signal Conditioning Front-ends Instruments Dedicated Instruments DEWE2
All-In-One
Option 3020-PS-BAT
Optional battery power supply
This option turns your DEWE-3020 into a fully battery powered instrument. The hot-
swappable batteries guarantee continuous operation without an external power
source. The instrument provides 2 slots for BAT-95WH batteries and can be oper-
ated for up to ~3 hours with 2 batteries installed. Since this time depends a lot on
the system configuration a DEWESoft plugin shows the battery status directly in
the software. Also alarm conditions can be set and the battery parameters can be
displayed as additional measurement channels. Operating temperature is limited to
0 .. 45° C when batteries are charged.
Option 3020-DC-UPS
This option changes the power supply of the instrument to a wide range 10 .. 32 V
DC
input with internal UPS battery for approx. 5 minutes. That power supply is ideally
suited for automotive applications as it can handle 12 V
DC
as well as 24 V
DC
and the
internal battery nicely bridges the voltage drop during start of the engine.
DEWE-UPS-300-DC
The DEWE-UPS-300-DC is an external DC uninterruptible power supply with up to
four internal high capacity batteries. It can be used to power instruments with wide
range DC input for hours. A typical DEWE-3020 with option 3020-DC-UPS can be
operated for approx. 5 hours using DEWE-UPS-300-DC. In addition the batteries are
hot-swappable and so enable you to run the instrument infinitely by changing batter-
ies every few hours. External battery chargers are available, too. If the DEWE-UPS-
300-DC is externally powered it also serves as a multi-battery charger.
Popular accessory, car seat mounting kit for the DEWE-3020 platform
The 3020-CSMK1 is a welded metal construction and comes with heavy duty straps
for the car seat and the DEWE-3020 itself.
System options and upgrades for DEWE-3020 series
Options Description
FIREWIRE-1394 PCI Firewire IEEE-1394 interface for the DEWE-3020
3020-PS-BAT
Battery power supply with UPS function, 18 .. 24 V
DC
non-isolated input, incl. external AC adaptor,
2 slots for hot-swappable batteries, 2 batteries for appr. 3 hours operation included
3020-DC-UPS
Power supply 10 to 32 V
DC
with internal UPS battery and external AC adaptor,
incl. 2 m DC connection cable to banana jacks
3020-CB8-BNC
Connection block with 8 BNC sockets, for simple signal connection of single-ended channels 8 to 15
of DEWE-3020 systems
DEWE-30-8-EXP
DEWE-3020 expansion, 8 additional amplifier slots for CH 8-15,
only one cable for power supply, RS-485 and analog channels, incl. 2 m connection cable
Upgrades Description
HDD-1000-SSD-256
Upgrade to 256 GB flash disk (replaces 1000 GB hard disk),
max. data throughput 40 MB/s
DEWE-3020 with opened
battery compartment
DEWE-UPS-300-DC
3020-CSMK1
3020-DC-UPS