Atec Aeroflex-RDL_NTS-1000B - Manual (Page 6)

Data Output
Measurement results can be
saved to the integral 3.5” disk
drive or output to the integral
printer port(s). The results of the
“Integrated Noise” and “Spur
List” can also be output. Virtually
every measurement result and
control is available over the inte-
gral IEEE-488 Bus.
Display Setup
Menus define the measurement
range, “Display Limits,” and
“Measurement Type.” The “Graph
Title” can be input, using a standard
PC keyboard, so that printer plots
contain identifying nomenclature.
The “Accumulate Data” mode can
be selected so that multiple mea-
surements can be displayed and
compared. The “Store Sweep”
modes provide means to “screen
save” an existing measurement or a
“disk stored” measurement can be
transferred to the display screen.
Data Processing
Definition of the frequency
limits for calculating
“Integrated Noise” is user
defined along with the range
and thresholds for”Spur
Identification” and “Noise
Spec Lines”. The starting
frequency of the “Moveable
Marker” is also available.