American Expedition Vehicles JK DualSport RS Suspension 3.5/4.5 - Manual (Page 9)

7
Note: On Rubicon models, remove the “fir tree” zip ties holding the speed sensor wiring to the frame and
upper control arm.
6. Remove and save all anti-sway bar links and hardware. Note orientation, new links will be installed in
the same way (Fig. 15)
7. Remove shocks and save all shock mounting hardware.
8. Lower axle and remove springs. DO NOT remove factory isolator.
9. For 2011 and newer models, remove and discard factory bracket from the brake line (Fig. 16).
Figure 15
Figure 16