American Expedition Vehicles JK DualSport RS Suspension 3.5/4.5 - Manual (Page 4)

2
Figure 3
5. Remove the bolts that hold the brake lines to the frame (Fig. 4 A).
6. Remove the shocks (Fig. 4 B).
7. Remove the swaybar end links and save. You will reuse the hardware for the rear and the end links will
be installed on the front of the vehicle. Note the orientation of the end links, the new end links will be
installed in the same way (Fig. 4 C).
A.
B.
B.
C.
NOTE: This nut is specific
to this location, it must be
returned to this location.
Figure 4