American Expedition Vehicles JK DualSport RS Suspension 3.5/4.5 - Manual (Page 3)

1
I. REAR SUSPENSION
1. Raise Jeep and support the frame using jack stands or a hoist, such that the rear axle can be lowered
enough to remove the springs. Support the axle by placing floor jack under the center of the axle. Re-
move the wheels (Fig. 1).
2. Loosen but DO NOT remove all 8 control arm bolts. Detach parking brake cables from axle (Fig. 2).
3. Remove and discard the parking brake cable bracket (Fig. 3). On 4-door models the parking brake
cable will need to be re-routed BELOW the frame cross-member. Reattach parking brake cable at axle.
4. Remove the track bar.
Figure 1
Figure 2