Alpha Technologies FlexNet PMR, GMR Series - Manual (Page 37)

031-239-C0-003 Rev C 37
Fig. 4-5, Left side
Mounting Rail
(as viewed from
front of enclosure)
Fig. 4-6, PMR Right
side Mounting Rail
(as viewed from
front of enclosure)
Fig. 4-7, GMR Right
side Mounting Rail
(as viewed from
rear of enclosure)
PMR enclosure PMR enclosure GMR enclosure
4.0 Equipping the System, continued
4.3 Mounting Rail Adjustment
The equipment mounting rails are held in place by #10-32 hardware at the top and bottom
of each rail. The distance between each stud (upper) and threaded hole (lower) is 1". The
seven studs and seven threaded holes provide six mounting positions for specific customer
applications.
To reposition the rails, remove the screws or nuts and slide the rail forward or backward to the
next set of holes or studs and replace the screws or nuts.