ABUS AZ4299 Terxon SX Base Kit with sounder Operating instructions - Manual (Page 34)

15
UK
Rauchm. Ala.
ZN nn Zone nn has triggered a fire alarm
Rauchm. Ala.
ZN nn Zone nn fire alarm reset
Detector test ZN
nn Zone nn sensor test failed
Siren tamper
reset Siren tamper alarm reset
Sir. Sabo Siren tamper alarm triggered
System auto
active System automatically rearmed
System started System supplied with power and
started
Sabo ZN nn Zone nn has triggered a panic alarm
Sabo ZN nn OK Zone nn panic alarm reset
Tech ZN nn
alarm Zone nn has triggered a technical
alarm
Tech ZN nn OK Zone nn alarm reset
Tel line error Error in transmission (not for Terxon
SX)
Tel line error OK Transmission error reset
Bnn changed
Bnn User nn has changed the user code
of user nn
Bnn deleted Bnn User nn has deleted the user code of
user nn
Bnn exit User nn has exited the program
menu
Bnn enter User nn has entered the program
menu
Bnn SYS OK User nn has reset the alarm centre
Bnn SYS act User nn has reset the alarm centre
Bnn SYS deact User nn has deactivated the alarm
centre
Bnn time/date User nn has changed the time and
date
Bnn ZN nn
locked User nn has removed ZN nn from
monitoring
Bnn ZN nn
unlocked User nn has returned ZN nn to
monitoring
The master code is saved as B00, and user codes 01 to
16 as B01 to B16. If you activate the system via a key
switch, this is shown as B21.
9.7 Changing date and time
The internal clock continues to run as long as it is supplied
with power If both the mains and the battery supply fail,
the date and time are reset. To change the date and time
(e.g., from summertime to wintertime):
Enter user code 1 (or B001 or the master code). Only this
code can change the date and time.
The display shows:
Press:
6 .
The display shows:
Enter two-digit numbers for the date, month and year. Use
01 for January and 12 for December.
Confirm your input by pressing: .
After the final input, the display shows:
Now enter two-digit numbers for the time.
Confirm your input by pressing:
.
After you enter the date and time, the alarm centre
confirms with a double tone and the control unit shows the
current date and time again.