AAEON EMB-BT1 - Manual (Page 54)

3-22 EMB-BT1
3.6 Boot menu
The Boot menu items allow you to change the system boot options.
3.6.1 Boot Configuration
Setup Prompt Timeout [3]
Input number of seconds to wait for setup activation key.
Bootup NumLock State [On]
[On]
Sets the power-on state of the NumLock to [On].
[Off] Sets the power-on state of the NumLock to [Off].
Quiet Boot [Disabled]
Configuration options: [Disabled] [Enabled]
Boot Option [Disabled]
Set system boot order.
Configuration options: [Disabled] [UEFI: Built-in EFI Shell]
To change a user password:
1. Select the User Password item and press .
2. From the Enter Current Password box, key in the current password, then
press .
3. From the Create New Password box, key in a new password, then press
.
4. Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password,
but press when prompted to create/confirm the password. After you clear
the password, the User Password item on top of the screen shows Not Installed.