AAEON IMBA-H61A - Manual (Page 41)

Chapter 3: BIOS setup 3-11
3.4.8 Onboard Devices Configuration
HD Audio Controller [Enabled]
[Enabled]
Enables the High Definition Audio Controller.
[Disabled] Disables the controller.
Realtek LAN1 Controller [Enabled]
[Enabled]
Enables the Realtek LAN controller 1.
[Disabled] Disables the controller.
Realtek LAN1 PXE OPROM [Disabled]
This item appears only when you set the Realtek LAN1 Controller item to
[Enabled] and allows you to enable or disable the PXE OptionRom of the Realtek
LAN controller 1. Configuration options: [Enabled] [Disabled]
Realtek LAN2 Controller [Enabled]
[Enabled]
Enables the Realtek LAN controller 2.
[Disabled] Disables the controller.
Realtek LAN2 PXE OPROM [Disabled]
This item appears only when you set the Realtek LAN2 Controller item to
[Enabled] and allows you to enable or disable the PXE OptionRom of the Realtek
LAN controller 2. Configuration options: [Enabled] [Disabled]
RS Mode [RS232]
Allows you to configure the serial communications standard of serial port (COM) 2.
Configuration options: [RS232] [RS422] [RS485]
3.4.9 APM
AT/ATX Power Type [ATX Mode]
Changing the AT/ATX Power Type will directly affect the Restore AC Power Loss
setting. Configuration options: [AT Mode] [ATX Mode]
Restore AC Power Loss [Power Off]
This item will not be available when AT/ATX Power Type is changed to AT Mode.
[Power On]
The system goes into on state after an AC power loss.
[Power Off] The system goes into off state after an AC power loss.
[Last Status] The system goes into either off or on state, whatever the system
state was before the AC power loss.