AAEON IMBA-H61A - Manual (Page 27)

2-19 Chapter 2: Motherboard information
5. Intel ® H61 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1~3)
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical
drives via Serial ATA 3.0 Gb/s signal cables.
• You must install Windows ® XP Service Pack 3 or later version before using
Serial ATA hard disk drives.
• Due to H61 Chipset limitations, AHCI Mode only works on Windows ® Vista/
Windows ® 7. Please use IDE Mode on Windows ® XP.
• To configure the SATA type in BIOS, click Advanced tab > SATA
Configuration > SATA Mode Selection. See section 3.4.3 SATA
Configuration for details.
• When using hot-plug and NCQ, set the SATA Mode Selection item in the
BIOS to [AHCI]. See section 3.4.3 SATA Configuration for details.
SATA3G_3
GND RSATA_RXP3 RSATA_RXN3 GND RSATA_TXN3 RSATA_TXP3 GND
SATA3G_4
GND RSATA_RXP4 RSATA_RXN4 GND RSATA_TXN4 RSATA_TXP4 GND
SATA3G_1
GND RSATA_RXP1 RSATA_RXN1 GND RSATA_TXN1 RSATA_TXP1 GND
SATA3G_2
GND RSATA_RXP2 RSATA_RXN2 GND RSATA_TXN2 RSATA_TXP2 GND
IMBA-H61A Intel ® SATA 3.0Gb/s connectors
PIN 1
TPM1
SB_SUS_STAT GND +3VSB SMBSCL LAD0 +3V LAD3 PCIRST# FRAME PCICLK
RESET
GPIO
SERIRQ SMBSDA
GND LAD1 LAD2
PWROWN
GND
IMBA-H61A TPM Connector
6. TPM connector (20-1 pin TPM1)
This connector supports a Trusted Platform Module (TPM) system, which can
securely store keys, digital certificates, passwords, and data. A TPM system
also helps enhance network security, protects digital identities, and ensures
platform integrity.