Cla-Val PV15 - Manual

Quality Features at No
Extra Cost!
• Short face-to-face
• Full port area
• Center sleeve closure
• Tight shut-off on solids
• Over pinch guard
• Positive pull opening tabs
• Valve position clearly visible
Heavy Construction at No Extra Cost!
• Rugged carbon steel body
• Easy to operate at high pressure
• Lubricated stem and bearing pad
• Stainless steel guide rods
• Reduced port sleeve for throttling flow
• Double wall sleeves for severe service
Open Body Pinch Valve
OPERATION
The Cla-Val Series PV15 Open Body Pinch Valves provide simple
means to manually control the flow of abrasive and corrosive slurries,
liquids and solids.
The valve operates by turning the handwheel clockwise to close, count-
er-clockwise to open like a gate valve, but unlike a gate valve the PV15
series valve has no sliding or rubbing metal surfaces to wear out - the
sleeve is merely squeezed to the desired open or closed position. As a
standard sleeve material, pure gum rubber with reinforced polyester
fabric is used for highest strength and longer lasting cycle life.
MAINTENANCE
Cla-Val Pinch Valves are basically maintenance free because the
sleeve isolates all mechanical parts from the media. The sleeve is
the only part typically inventoried for future replacement.
Many Synthetic Sleeve Materials
Available:
Neoprene - Chlorobutyl - Hypalon - Buna-N ® -
Ethylene Propylene Rubber - Urethane and Viton TM
When ordering above sleeve materials add the first
letter of the material after the model number.
i.e. Model PV15-N (N for Neoprene)
-High Pressure-
Applications
Mining - Waste and Water Treatment -
Food Processing, Plants
The body of the PV15 Series Valve is available
in carbon steel, aluminum or stainless steel. the
open-frame design is standard.
WHEN ORDERING,
Note: please specify following information:
Flange
Drilling ANSI
PN 6
PN 16
Other ANSI 300
PN 10
BS 10 n
n
n
n
n
n
n
ID 1
F/F 1
W 1
A 1
B 1
C 1
Max. Work
Pressure 2
Weight 3
(est.)
1/2
4 -1/2
3 -1/2
1 -3/4
4 -1/8
4
200
5
3/4
5 -1/2
6
2
5
4
200
7
1
6
6
2 -1/4
7
6
200
10
1 1/2
6
6 -1/2
2 -1/2
8
8
200
15
2
8
8
3
9-1/4
9
200
32
2 1/2
10
9
3 -1/2
10
10
200
42
3
12
10
3 -3/4
12
12
150
51
4
16
11 -3/4
4-1/2
14 -1/4
14
150
68
5
20
13-1/2
5
16
16
150
102
6
24
15-1/2
5-1/2
18
18
150
123
8
32
19
6-3/4
20
20
150
198
10
40
25
8
22
26
150
385
12
48
28
9-1/2
26
32
150
529
14
42
31-3/8
10-1/2
32
36
150
616
16
48
37
11-3/4
36
40
150
700
18
54
40
12-1/2
40
44
150
770
20
60
44
13-3/4
44
48
150
910
24
72
51-3/4
16
54
54
150
1260
1-inches 2-psi 3-pounds Dimensions can be revised to fit custom specifications.
Series PV15
Pinch Valve
Standard Sleeve
Pinch Valve
Reduced Port Sleeve
Pinch Valve
Double Wall Sleeve