Cla-Val 81-07/681-07 - Manual (Page 4)

Temperature Rating
Water: to 180°F. Max.
Speed Controls
Opening and closing speed controls are
standard on the 81-02 and 681-02 Model.
* Note: Advise factory when ordering if valve will
not be installed with the main valve stem in a
vertical position.
Materials
Standard Pilot System Materials
Fittings: Brass
Tubing: Copper
Optional Pilot System Materials
Pilot Systems are available with
optional stainless steel or Monel
materials.
When Ordering,
Please Specify
1. Catalog No. 81-07 or 681-07
2. Valve Size
3. Pattern - Globe or Angle
4. Pressure Class
5. Threaded or Flanged
6. When Vertically Installed *
Pilot System Specifications
PO Box 1325 Newport Beach CA 92659-0325
Phone: 949-722-4800 Fax: 949-548-5441
CLA-VAL
CLA-VAL CANADA CLA-VAL EUROPE
4687 Christie Drive
Beamsville, Ontario
Canada L0R 1B4
Phone: 905-563-4963
Fax: 905-563-4040 Chemin dés Mesanges 1
CH-1032 Romanel/
Lausanne, Switzerland
Phone: 41-21-643-15-55
Fax: 41-21-643-15-50
© COPYRIGHT CLA-VAL 2013 Printed in USA
Specifications subject to change without notice. www.cla-val.com E-81-07/681-07 (R-1/2013)
Represented By:
81-07
Valve
Selection
100-01 Pattern: Globe (G), Angle (A), End Connections: Threaded (T), Grooved (GR), Flanged (F) Indicate Available Sizes
Inches 1 1 1 ⁄
4
1 1 ⁄
2
2 2 1 ⁄
2
3 4 6 8 10 12 14 16 18 20 24 30 36
mm 25 32 40 50 65 80 100 150 200 250 300 350 400 450 500 600 750 900
Basic Valve
100-01
Pattern
G, A G, A G, A G, A G, A G, A G, A G, A G, A G, A G G G, A
End Detail
T , F,
Gr
T , F,
Gr*
T , F,
Gr
T , F,
Gr
T , F,
Gr*
T , F,
Gr*
F F F F F F F
Suggested
Flow
(gpm)
Maximum 63 90 138 240 550 950 1475 2100 2600 3400 4200 5200 7700
Suggested
Flow
(Liters/Sec)
Maximum 4.0 5.7 8.7 15.1 34.7 60 93 132 164 214 265 328 485
100-01 Series is the full internal port Hytrol. * Globe Grooved Only
681-07
Valve
Selection
100-20 Pattern: Globe (G), Angle (A), End Connections: Flanged (F) Indicate Available Sizes
Inches 3 4 6 8 10 12 14 16 18 20 24 30 36 42 48
mm 80 100 150 200 250 300 350 400 450 500 600 750 900 1000 1200
Basic Valve
100-20
Pattern
G G, A G, A G, A G G G G G G G G
End Detail F F F F F F F F F F F F
Suggested
Flow
(gpm)
Maximum 60 138 240 550 950 1475 2100 2100 3800 3800 3800 8400
Suggested
Flow
(Liters/Sec)
Maximum 3.8 8.7 15.1 35 60 93 132 132 239 239 239 529
100-20 Series is the reduced internal port size version of the 100-01 Series.