Cla-Val 380GF User Manual
380gf, Sexless coupling

The Cla-Val Model 380GF Sexless
Coupling provides a very simple means
of connecting two flow conduits
together without regard to coupling
type. There is no male or female
variant, making it possible to connect
any two identical couplings. This is
especially valuable in environments
where visibility is restricted by weather
conditions or by darkness. The Model
380GF Sexless Coupling is used
whenever there is a need to make
quick assembly of system components
with speed and in extreme conditions.
The Cla-Val Model 380GF Sexless
Coupling will safely interface and work
with interlock features of most
commonly used couplings and
components.
The 380GF Sexless Coupling can be
configured either with or without an
integral ball valve. This ball valve can
be opened after connection to a mating
coupling to allow for the flow of fuel, but
must be fully closed before
disconnection can be accomplished.
This interlock feature ensures that fuel
will not be accidentally spilled.
Coupling assemblies are available with
a variety of adapter connections
including flat MS flanges, Camlok
fittings or NPT connections - all of
which are capable of mating with
different hose sizes and a variety of
other components. Consult factory if
other end connection types are
desired.
The 380GF Sexless Coupling features
a lift-and-turn folding operating lever.
This convenient design makes it easy
to open and close the integral ball valve
even when wearing thick arctic mittens.
The folding operating lever handle
locks in both open and closed
positions.
The Cla-Val Model 380GF Sexless
Coupling is constructed of aircraft-
grade Aluminum and Stainless Steel.
This very rugged design can withstand
a high level of abuse and still reliably
function in critical applications. Each
coupling features a swivel joint with a
ball bearing race and a low friction seal.
This swivel joint is easy to rotate even
in extreme environments or when left
to stand for many months in storage.
Sexless Coupling
380GF
•
Created for tactical US Army Fuel Systems
•
Interchangeable with similar 2-inch couplings,
manufactured by other suppliers
•
Sexless configuration is designed to mate with any
two couplings, allowing for the connection of hose
assemblies, regardless of the end fitting
•
Available with or without Integral Ball Valve
•
Safety Interlock Design
•
Flat MS Flanges, Camlok Fittings and NPT Adapter
Connections Available
•
Convenient Lift-and-Turn Folding Operating Lever
•
Ball Race Swivel Joint with Low Friction Seal
•
2 inch and 3 inch Sizes Available
MODEL
The Cla-Val Model 380GF Sexless Coupling meets all the
design and performance requirements of government
specification A-A-59377 Revision A, “Commercial Item
Description – Coupling Assembly, Quick Disconnect, Sexless
Type”.
The Cla-Val Model 380GF Sexless Coupling provides a means
of coupling two hoses, or other components, together without
the need to match up male and female features. When
connected, face seals ensure a drip-tight connection with the
mating coupling. When connected, couplings with ball valve
shut off features cannot be disconnected when the ball valve(s)
are in the open position.
Technical Information
•
Designed per A-A-59377A
•
Pressure Drop - 3 psi/.206 bar maximum for
size 2-inch unit at 200 gpm (757 l/minimum)
•
Operating Pressure - 100 psi (6.895 bar)
•
Burst pressure - 300psi (20.684 bar)
•
Hose Swivel Torque - 240 in-lb maximum at
100 psi (6.894 bar)
•
Operating Temperatures - 25°F to + 155°F
(-31.7°C to +68.3°C)