Cla-Val CRL-60 Series - Manual (Page 2)

Size 1/2" & 3/4" Threaded
Temperature Range Water, Air: to 180°F Max.
Materials
Body & Cover: Cast Bronze UNS C87850 Low Lead
Stainless Steel ASTM A743-CF-16Fa
Trim: Brass & Stainless Steel 303
Rubber: Buna-N ® Synthetic Rubber
Pressure Ratings Bronze 400 psi Max.
Stainless Steel 400 psi Max.
Other Materials Available on special order
Adjustment Ranges 0 to 75 psi
20 to 105 psi
20 to 200 psi
100 to 300 psi
When Ordering, Please Specify
1. Catalog No. CRL-60 2. Valve Size 3. Adjustment Range Desired 4. Optional Materials 5.Optional Security Cap
Specifications
Pressure Drop Chart (Full Open Valve)
5 10 15 20 30
1/2" 6 0.7 2.7 6 11 ----
3/4" 8.5 0.3 1.4 3.1 5.5 12.2
Valve
Size Cv
Factor
Flow of Water - gpm
PO Box 1325 Newport Beach CA 92659-0325
Phone: 949-722-4800 Fax: 949-548-5441
CLA-VAL
CLA-VAL CANADA CLA-VAL EUROPE
4687 Christie Drive
Beamsville, Ontario
Canada L0R 1B4
Phone: 905-563-4963
Fax: 905-563-4040 Chemin dés Mesanges 1
CH-1032 Romanel/
Lausanne, Switzerland
Phone: 41-21-643-15-55
Fax: 41-21-643-15-50
© COPYRIGHT CLA-VAL 2014 Printed in USA
Specifications subject to change without notice. www.cla-val.com E-CRL-60 (R-05/2014)
Represented By:
CRL-60
PSI
Approximate Increase
For Each Clockwise Turn
Of Adjusting Screw
0 to 75 8.5 psi
20 to 105 12.0 psi
20 to 200 28.0 psi
100 to 300 18.0 psi
.86
INLET
2.00
6.75
1.31
23
0 to 75 and 20 to 200 psi design
3.50
3.12
A A
9.61
1.31
24
100 to 300 psi design
(applies to both
configurations)
1/8” NPT
Pressure
Sensing Port 1/8” NPT
Pressure
Sensing Port
3.12
3.50
Dimensions